Doscam Emu

[Engineer]

Ho provato con diverse immagini ma niente non c'è verso di fargliela leggere, elisabeths1974 dato che a te funziona, che immagine hai flashato?
Questo è il file di log

-------------------------------------------------------------------------------
>> DOSCam << started at Sat Jun 25 09:14:44 2016
-------------------------------------------------------------------------------
2016/06/25 09:14:44        0 s >> DOSCam << started, V0.25 (mipsel-unknown-linux-gnu-libusb)
2016/06/25 09:14:44        0 s creating pidfile /tmp/.doscam/doscam.pid with pid 571
2016/06/25 09:14:44        0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2016/06/25 09:14:44        0 s signal handling initialized
2016/06/25 09:14:44        0 s monitor: initialized (fd=5, port=988)
2016/06/25 09:14:44        0 s cccam (used for zeroconf): initialized (fd=6, port=21526)
2016/06/25 09:14:44        0 s Slot1 [internal] creating thread for device /dev/sci0
2016/06/25 09:14:44        0 s EMU [constcw] creating thread for device /var/keys/doscam/SoftCam.Key
2016/06/25 09:14:44        0 s loadbalancer: can't read from file /tmp/.doscam/stat
2016/06/25 09:14:44        0 s waiting for local card init
2016/06/25 09:14:44   538978 r Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2016/06/25 09:14:44   53A500 p EMU init failed - Keyfile not found!
2016/06/25 09:14:44 76800470 h webif: decompressed 50154 bytes back into 144440 bytes
2016/06/25 09:14:44 76800470 h HTTP Server running. ip=0.0.0.0 port=8080
2016/06/25 09:14:45   538978 r Slot1 [internal] card detected
2016/06/25 09:14:45   538978 r Slot1 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2016/06/25 09:14:45   538978 r Slot1 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/25 09:14:45   538978 r Slot1 [internal] Calculated work ETU is 6.40 us
2016/06/25 09:14:45   538978 r Slot1 [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
2016/06/25 09:14:45   538978 r Slot1 [internal] Card responded ok for ifsd request of 251
2016/06/25 09:14:46   538978 r Slot1 [internal] detect nagra tiger card
2016/06/25 09:14:47   538978 r Slot1 [internal] card system not supported
2016/06/25 09:14:47   538978 r Slot1 [internal] Normal mode failed, reverting to Deprecated Mode
2016/06/25 09:14:47   538978 r Slot1 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2016/06/25 09:14:47   538978 r Slot1 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/25 09:14:47   538978 r Slot1 [internal] Calculated work ETU is 74.40 us
2016/06/25 09:14:53   538978 r Slot1 [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
2016/06/25 09:14:56   538978 r Slot1 [internal] Warning: Card returned error on setting ifsd value to 251
2016/06/25 09:14:57   538978 r Slot1 [internal] detect nagra tiger card

-------------------------------------------------------------------------------
>> DOSCam << started at Sat Jun 25 09:15:00 2016
-------------------------------------------------------------------------------
2016/06/25 09:15:00        0 s >> DOSCam << started, V0.25 (mipsel-unknown-linux-gnu-libusb)
2016/06/25 09:15:00        0 s creating pidfile /tmp/.doscam/doscam.pid with pid 615
2016/06/25 09:15:00        0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2016/06/25 09:15:00        0 s signal handling initialized
2016/06/25 09:15:00        0 s monitor: initialized (fd=5, port=988)
2016/06/25 09:15:00        0 s cccam: Bind request failed (Address already in use), waiting another 119 seconds
2016/06/25 09:15:01        0 s cccam: Bind request failed (Address already in use), waiting another 118 seconds
2016/06/25 09:15:02        0 s cccam (used for zeroconf): initialized (fd=6, port=21526)
2016/06/25 09:15:02        0 s Slot1 [internal] creating thread for device /dev/sci0
2016/06/25 09:15:02        0 s EMU [constcw] creating thread for device /var/keys/doscam/SoftCam.Key
2016/06/25 09:15:02        0 s loadbalancer: can't read from file /tmp/.doscam/stat
2016/06/25 09:15:02        0 s waiting for local card init
2016/06/25 09:15:02   538978 r Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2016/06/25 09:15:02   53A500 p EMU init failed - Keyfile not found!
2016/06/25 09:15:02 77000470 h webif: decompressed 50154 bytes back into 144440 bytes
2016/06/25 09:15:02 77000470 h HTTP Server running. ip=0.0.0.0 port=8080
2016/06/25 09:15:03   538978 r Slot1 [internal] card detected
2016/06/25 09:15:04   538978 r Slot1 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2016/06/25 09:15:04   538978 r Slot1 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/25 09:15:04   538978 r Slot1 [internal] Calculated work ETU is 6.40 us
2016/06/25 09:15:04   538978 r Slot1 [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
2016/06/25 09:15:04   538978 r Slot1 [internal] Card responded ok for ifsd request of 251
2016/06/25 09:15:05   538978 r Slot1 [internal] detect nagra tiger card
2016/06/25 09:15:05   538978 r Slot1 [internal] card system not supported
2016/06/25 09:15:05   538978 r Slot1 [internal] Normal mode failed, reverting to Deprecated Mode
2016/06/25 09:15:06   538978 r Slot1 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2016/06/25 09:15:06   538978 r Slot1 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/25 09:15:06   538978 r Slot1 [internal] Calculated work ETU is 74.40 us
2016/06/25 09:15:12   538978 r Slot1 [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
2016/06/25 09:15:15   538978 r Slot1 [internal] Warning: Card returned error on setting ifsd value to 251
2016/06/25 09:15:16   538978 r Slot1 [internal] detect nagra tiger card
2016/06/25 09:15:23   538978 r Slot1 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2016/06/25 09:15:30   538978 r Slot1 [internal] T1 Resync command error, trying to reactivate!
2016/06/25 09:15:31   538978 r Slot1 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2016/06/25 09:15:31   538978 r Slot1 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/06/25 09:15:31   538978 r Slot1 [internal] Calculated work ETU is 6.40 us
2016/06/25 09:15:31   538978 r Slot1 [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
2016/06/25 09:15:31   538978 r Slot1 [internal] Card responded ok for ifsd request of 251
2016/06/25 09:15:31   538978 r Slot1 [internal] card system not supported
2016/06/25 09:15:31   538978 r Slot1 [internal] card initializing error
2016/06/25 09:15:32        0 s init for all local cards done
2016/06/25 09:15:32        0 s anti cascading disabled
2016/06/25 09:15:32   53C088 c plain dvbapi-client granted (DVBApi, au=on (2 reader))
2016/06/25 09:15:32   53C088 c Detected /dev/dvb/adapter0/demux0 Api: 0
2016/06/25 09:15:32   53C088 c [ADD PID 0] CAID: 183D ECM_PID: 0728 PROVID: 000000
2016/06/25 09:15:32   53C088 c [ADD PID 1] CAID: 183E ECM_PID: 0750 PROVID: 000000
2016/06/25 09:15:32   53C088 c Found 2 ECMpids and 3 STREAMpids in PMT
2016/06/25 09:15:32   53C088 c New program number: 4531 (183D:4531 unknown) [pmt_list_management 3]

Sono ora con Openatv 5.3 pulita