Images dreambox 800hd se

[chenoui70]

newnigma2-stable-lean-dm800se-v4.0.16 -ramiMAHER#ssl84D_BY_G-ogi_Images_Clone
sim2
enigma2:patched : 12.03.2015: by ramiMAHER

Basics:

Enigma2 4.0: 30.12.2015
Enigma2 Plugins: 02.01.2016
Newnigma2 Plugins: 02.01.2016


DM 800 HD se

driver: 02.12.2015
secondstage: 84
kernel 3.2.68


DM 800 HD se v2

driver: 02.12.2015
secondstage: 89
kernel 3.2.68



changelog E2 30.12.2015:

dvbnamespace is now always 0xFFFF0000 for DVB-C and 0xEEEE0000 for DVB-T (compatible with OE2.2)
fixed possible crashes / endless loops on title change in mediaplayer (introduced in 20151202 tarball)
fixed possible crashes on try to play unaccessible mediafiles
fixed possible deadlock caused by media subtitles
fixed audio/subtitle selection on movie playback with players opened via mainmenu
better compatibility with external plugins which patches the ChannelSelection
fixed crash on non driver based cable transponder search



changelog E2 02.12.2015:

fixed H264 video detection of some TV services (sometimes AC3 descriptors are sent on the videopid?!?.... ignore this for now)
CommonInterfaceAssignment: dont crash when no accessible CI is available
allow to override broken transponders (same TSID/ONID combinations) via /etc/enigma2/scan_tp_valid_check.py again
DVDPlayer
- reset the in_menu state on service stop (fixes buttons not working on next service start .. probably after choosing another iso file or dvd folder via filebrowser)
- small fixes (from go4dream)
unicable.xml: add Spaun SUS5581/33NF models (thx to Uenz)
PicturePlayer: allow to disable the pictureplayer border to allow unscaled pictures up to skin resolution
useful for displaying test images to optimize sharpness, contrast, brightness settings)
set http timeout for servicemp3 streaming to 30 seconds
delay playService requests until the ChannelSelection is fully initialized
fixed hbbtv video download
added si2166b blindscan support
added use SCPC search range option for si2166b tuner
show correct nim slot descriptions in infobar and serviceinfo dialog (A1/A2/B1/B2) skin must support this!!
optimized speed of servicescan without NIT a bit
small dvdplayer fixes (from go4dream)




Notice: Update from v4.0.x to 4.0.16 only possible by updating via console.

Changes:

Added: Newnigma2 FileBrowser
Added: Skin Evolution-HD by Kerni (thx)
Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
Added: Kerni.Gnome-HD by Kerni (thx)
Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
Added: swapmanager
Added: wget
Added: stat
Added: weathercomponent (needed for some skins)
Added: eventposition (needed for some skins)
Added: reftopiconname (needed for some skins)
Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
Added: Black-Box.HD.ME (32bit skin)
Added: cryptsetup more information
Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
Added: free space check's before installing or upgrade packages
Added: min free flash space is 3mb for installing/upgrading some packages
Added: improve network connectivity check in newnigma2 installer
Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
Added: readded extendedinfobar
Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
Bugfix: neutrino keymap
Bugfix: newnigma2.Kerni.PanTV-HD icons
Bugfix: Caid Renderer didn't close ecm.info and share.info properly
Bugfix: for loading wrong or no newnigma2 service menu png's
Bugfix: loosing picon value in servicelist after using configsaver
Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
Bugfix: broken gui installer
Update: Some improvements on our onlineinstaller
Update: znc to version 1.4
Update: openvpn to version 2.3.4
Update: german translation
Update: picon renderer. create piconSList dir for servicelist picons.
Update: IPTV-List-Updater
Update: cryptsetup
Update: openssl
Removed: we have removed non working plugins. most of them are integrated in mediaportal.
Removed: keymanger plugin from image. It's still available from our feed.
here u can find USB to UART driver
here u can find DreamUP V1.3.3.11



Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

Important changes:

1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings

3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!

4. issue due upgrade to v4.0.16:
if you have troubles by upgrading to v4.0.16 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

Wichtige Änderungen:

1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!

4. Bei Problemen mit dem Update auf v4.0.16:
Sollte das Update auf v4.0.16 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.

Your
Newnigma2 Team

Download

**Contenu caché: Cliquez sur Thanks pour afficher. **

[chenoui70]

MastaG's OpenPLi-4 / Gstreamer 1.7.1 (master git) images_Clone_05_01_2016



Please reflash your receiver since a software update will most likely fail.
Especially on spark/spark7162.

Changes since previous release:

- Gstreamer snapshot updated to 1.7.1:
* The mp4 issue when playing from remote locations has been fixed upstream, so I've dropped the revert.
* Libsoup has been updated so I've dropped the revert for the old libsoup as well.
- DM800Se V2 and DM500HD V2 kernel config has been cleaned and more in sync with PLi's config for the other Dreambox models.
- More free space by adding a task before do_package_write_ipk which will upx compress some binaries.
* This should give us a few more MBs to work with (Dreambox *cough*).
- Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.
* Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.
* Enable of the zram module.
* Shipping his wifi drivers.
* VFD time is now synced every 5 minutes using a cron job.
* Software update and plugin-installation has been fixed.
* Using Tapaat's lirc config for spark and spark7162.
- The usual batch of dvbmediasink fixes by Christophecvr and mx3L:
* A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.
- Libsoup has been updated to 2.52 (from master-next).
- Refactor wifi drivers a bit on Linux 2.6.18, not auto-loading the mt7600 anymore, the correct driver should hopefully be loaded when you plugin your wifi stick.

Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
Please use 'duckbox' instead.
- On Zgemma Star you cannot use full HD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

TODO:
- Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink driver to load on startup (eg. rt3070, rt55xx, mt7600), since they cannot be loaded at the same time.
- Linux 2.6.18: Look into the v4l usb drivers.
- Add Spark specific plugins by gorski.
- Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.

**Contenu caché: Cliquez sur Thanks pour afficher. **

THX TO ZVONKO67

[chenoui70]

OoZooN-Image-dm800se OE 2.0_Images_Originale
Date: 2016-01-17
Enigma2: 3.999git20151231-r9.1.0
Distro: opendreambox 2.0.0
Machine: Dreambox dm800se
Issuer: OoZooN
MD5: c7b82a672dbed4689c244785584098b5
SHA256: 585f58a8b41fc896cf94770cdb645a10c0604c4abbbe0afedb a809db13b0d1c4

**Contenu caché: Cliquez sur Thanks pour afficher. **

OoZooN-Image-dm800 OE 2.0_Images_Originale
Date: 2016-01-17
Enigma2: 3.999git20151231-r9.1.0
Distro: opendreambox 2.0.0
Machine: Dreambox dm800
Issuer: OoZooN
MD5: c1a6218ab29e8782f56620c67131d3b3
SHA256: 9056f8b045ff0bce76d6298c2d6ad222ecd2de6e741380b29a 4631eb31b43bde

**Contenu caché: Cliquez sur Thanks pour afficher. **

OoZooN-Image-dm800sev2 OE 2.0_Images_Originale
Date: 2016-01-17
Enigma2: 3.999git20151231-r9.1.0
Distro: opendreambox 2.0.0
Machine: Dreambox dm800sev2
Issuer: OoZooN
MD5: 35f63eb563874e5fc268134b571d5ef4
SHA256: 31a4fbf9238de4810dd07e1f4f33a81c663cb0e20148ec59ed 628b492f5ad1c5

**Contenu caché: Cliquez sur Thanks pour afficher. **

[chenoui70]

DM 800SE HD Clone Images_BY_ZVONKO
800se Ferrari (@AWA) mips32el python2.7 PBnigma VX 3.0
mips32el, python 2.7x compatible (or in false, but nevertheless popular terms - OE 2.0/PLi 3-4)
- newer gcc, custom kernel and matching drivers
- latest E2 code
- fixed DTS downmix
- fixed streaming issues
- system and extensions parts updated
- feeds up to date
- fixed recording
- fixed partitionig of large USB sticks
- fixed intro wizard
- new skins: MintPrint and BluePrint
- reduced flash footprint
- kernel fixes
- fixed default skin missing../icon
- lot of small-misc changes

NOTE:
This is sort of 'proof of concept' release, 'experimental' attribute is too generous, so beware
It is NOT intedended as such for everyday use, just testing.

Was gibt es Neues in dieser Version 2014 May 1 VX-3 (Zeige gesamtes Changelog)
27.4.2014
- fixed LCD display
- misc default skin changes
29.4.2014
- misc skin fix for EPG import
- OKB skin in feeds
1.5.2014
- unify keymap for new and old RC
- add teletext section for old RC
- USALS and tuner fixes
- boxtype for hbbtv
- fix downloader for some https issues
9.5.2014
- latest E2 code
- feeds up to date
12.5.2014
- latest E2
- fixed feed trouble
13.5.2014
- disabled nfs daemon and exportfs
- kernel changes
14.5.2014
- temporary revert to 1.5.2014 release
18.5.2014
- fixed updates for 1.5.2014 image until the problem is found

**Contenu caché: Cliquez sur Thanks pour afficher. **

[chenoui70]

OoZooN-Image-eB-sim2-dm800sev2-17_01_2016
Image_Clone_BY_G_Ogi

Date: 17_01_2016_15:35
Enigma2: 3.999git20151231-r9.1.0
Distro: opendreambox 2.0.0
Machine: Dreambox dm800sev2
Issuer: OoZooN
Homepage: OoZooN.tv
MD5: 35f63eb563874e5fc268134b571d5ef4
SHA256: 31a4fbf9238de4810dd07e1f4f33a81c663cb0e20148ec59ed 628b492f5ad1c5

**Contenu caché: Cliquez sur Thanks pour afficher. **

[smirnoffs69]

bonjour Chenoui 70
j'ai flasché ma dreambox 800 HD SE , jusque là c'est tout bon.
j'ai fais les réglages de bases.
et ensuite que dois je faire ( ts panel ?) en ipk .
comment mettre mes cccam ?
peut tu me faire un ptit tuto afin que je puisse avoir csat et c+ stp.
merci d'avance en tout cas.

[toonsi]

Bonjour,

Tu peux te faire une idée en allant à "VI-Installation du CCcam"

**Contenu caché: Cliquez sur Thanks pour afficher. **

[chenoui70]

Sim2-TSimage_3.0_OE-2.0-dm800se-20151231-#84d-Jasper-23_01_2016
Image_Clone
BY_ZVONKO67

Clean, no changes.
Sim2
SSL84d
Enigma2: 2015-12-30-tarball
################################################## #######################################

Webinterface is working.
Teletext is working.
WLAN is working

################################################## #######################################

**Contenu caché: Cliquez sur Thanks pour afficher. **

THX TO Jasper

[chenoui70]

Eurosat 2.0_Image_Originale_by_G-ogi

Update
GST 1.7.1
We recommend the Flash Box

**Contenu caché: Cliquez sur Thanks pour afficher. **

[chenoui70]

Sim2-PP_Neverland_v4.1-OE2.0-Aurora_Dreams-DM800SE-#84d-Jasper-01_11_2015
BY_Magnus
Image_clone
Clean, no changes.
Sim2
SSL84d
Enigma2: 2014-12-01-tarball (thx ramiMAHER)
################################################## #######################################
Webinterface is working.
Teletext is working.
WLAN is working

################################################## #######################################

**Contenu caché: Cliquez sur Thanks pour afficher. **

thx to Jasper