Images dreambox 800hd pvr

[chenoui70]

Sim2-dreambox-image-dm800-20151230-#84d-Jasper_01_01_2016
DMM Image Experimental (opendreambox-2.0.0)
Clean, no changes.
Sim2
SSL84d
Enigma2: 2015-12-30-tarball
================================================== ================================
Webinterface is working.
Teletext is working.
================================================== ================================
Download:
01_01_2016

**Contenu caché: Cliquez sur Thanks pour afficher. **

THX TO JASPER

[chenoui70]

MastaG's OpenPLi-4 / Gstreamer 1.7.1 (master git) images_Clone_05_01_2016

Please reflash your receiver since a software update will most likely fail.
Especially on spark/spark7162.

Changes since previous release:

- Gstreamer snapshot updated to 1.7.1:
* The mp4 issue when playing from remote locations has been fixed upstream, so I've dropped the revert.
* Libsoup has been updated so I've dropped the revert for the old libsoup as well.
- DM800Se V2 and DM500HD V2 kernel config has been cleaned and more in sync with PLi's config for the other Dreambox models.
- More free space by adding a task before do_package_write_ipk which will upx compress some binaries.
* This should give us a few more MBs to work with (Dreambox *cough*).
- Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.
* Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.
* Enable of the zram module.
* Shipping his wifi drivers.
* VFD time is now synced every 5 minutes using a cron job.
* Software update and plugin-installation has been fixed.
* Using Tapaat's lirc config for spark and spark7162.
- The usual batch of dvbmediasink fixes by Christophecvr and mx3L:
* A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.
- Libsoup has been updated to 2.52 (from master-next).
- Refactor wifi drivers a bit on Linux 2.6.18, not auto-loading the mt7600 anymore, the correct driver should hopefully be loaded when you plugin your wifi stick.

Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
Please use 'duckbox' instead.
- On Zgemma Star you cannot use full HD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

TODO:
- Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink driver to load on startup (eg. rt3070, rt55xx, mt7600), since they cannot be loaded at the same time.
- Linux 2.6.18: Look into the v4l usb drivers.
- Add Spark specific plugins by gorski.
- Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.

**Contenu caché: Cliquez sur Thanks pour afficher. **

THX TO ZVONKO67

[halfhalf]

BlackHole.2.1.7.WilCard.DM800HD.CLONE.SSL84D.SIM2. OE2.0.bymarwen.09.01.2016

09/01/2016: * New skin_default: Darkstar

- Support Ecminfo for Emu Wicardd

* Blackhole font size is Skinnable

- ADD Current Value

* BlackholeAddons updated:

- ADD Reload Setting (Reload Channel Lists)
- Now BlackholeAddons is in MainMenu (Menu-BlackholeAddons)

**Contenu caché: Cliquez sur Thanks pour afficher. **

[chenoui70]

Sim2-OoZooN-Image-dm800-20160117-#84d-Jasper-23_01_2016
Image_Clone
BY_ZVONKO67


Clean, no changes.
Sim2
SSL84d

Enigma2: 2015-12-30-tarball
##################################################
Webinterface is working.
Teletext is working.

##################################################
No WLAN driver included (this is a feature of OoZooN image):
1.Open a Telnet session to install or use Blue/Software Management/Manage Extensions/Network/ to install:
opkg install enigma2-plugin-systemplugins-wirelesslan
2.Open a FTP session and exchange the plugin.py
/usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
with a patched one

**Contenu caché: Cliquez sur Thanks pour afficher. **

reboot
##################################################

**Contenu caché: Cliquez sur Thanks pour afficher. **

THX TO Jasper

[chenoui70]

OpenPLi.4.0.NewGstreamer1.7.1.DM800HD.SSL84D .SIM2.OE2.0_06_01_2016
Image_Clone
BY_HALFHALF


















Changes since previous release:

- Gstreamer snapshot updated to 1.7.1:

* The mp4 issue when playing from remote locations has been fixed upstream,
so I've dropped the revert.

* Libsoup has been updated so I've dropped the revert for the
old libsoup as well.
- DM800Se V2 and DM500HD V2 kernel config has been
cleaned and more in sync with PLi's config for the other Dreambox models.

- More free space by adding a task before do_package_write_ipk which will upx compress some binaries.

* This should give us a few more MBs to work with (Dreambox *cough*).

- Major rework of the meta-fulan BSP for spark thanks to Tapaat for helping me out.

* Now using Tapaat's drivers which fixes the frambuffer (and 22khz?) issue.

* Enable of the zram module.

* Shipping his wifi drivers.

* VFD time is now synced every 5 minutes using a cron job.

* Software update and plugin-installation has been fixed.

* Using Tapaat's lirc config for spark and spark7162.
- The usual batch of dvbmediasink fixes by Christophecvr and mx3L:

* A brand new divx/xvid bitstream unpacker by mx3L should fix playback of avi files with wrong fourcc.

- Libsoup has been updated to 2.52 (from master-next).

- Refactor wifi drivers a bit on Linux 2.6.18,
not auto-loading the mt7600 anymore,
the correct driver should hopefully be loaded
when you plugin your wifi stick.

Changes compared to openpli-oe-core gst-1:
- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
- Every receiver uses christophecvr's multibox dvbmediasink.

- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers
(ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.

Known issues:
- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
Please use 'duckbox' instead.
- On Zgemma Star you cannot use full HD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

TODO:
- Linux 2.6.18: Create a plugin / ppanel to select which Realtek/Ralink driver to
load on startup (eg. rt3070, rt55xx, mt7600), since they cannot be loaded at the same time.
- Linux 2.6.18: Look into the v4l usb drivers.
- Add Spark specific plugins by gorski.
- Add meta-ini from OE-Alliance and shape it up for openpli-oe-core.

**Contenu caché: Cliquez sur Thanks pour afficher. **

**Contenu caché: Cliquez sur Thanks pour afficher. **

BlackHole.2.1.7.NewFix.DM800HD.SSL84D.SIM2.O E2.0.bymarwen.21.01.2016
Image_Clone
BY_HALFHALF























21/01/2016: * New Enigma2 Compiled

* Allow gstreamer to convert the audio when the dvbaudiosink doesn't
support the format

* servicemp3:

- follow GstBuffer API changes
- follow gstreamer api changes
- fix gstreamer assertions, iterating elements
- add sanitychecks on subtitle caps
- fix getting text-tags
- support text/x-raw subtitle caps

* servicedvb: allow timeshift to be started on an http ts stream

* Export timeshift helper functions

* channelselection:
From setup menu in channelselection go back to channelselection.
So you can toggle channelselectioncontextmenuCustomise
and configchannelselection

* Fix crash when writing epg cache to the disk:
Timestamp in contentTimeMap can differ from eventData timestamp.
In such cases eventData is not removed from timeMap. timeMap is
used in eEPGCache::save which accesses in such a case freed memory.
This can cause crash.

**Contenu caché: Cliquez sur Thanks pour afficher. **

**Contenu caché: Cliquez sur Thanks pour afficher. **

[halfhalf]

BlackHole.2.1.7.NewFix.DM800HD.CLONE.SSL84D.SIM2.O E2.0.bymarwen.21.01.2016

21/01/2016: * New Enigma2 Compiled

* Allow gstreamer to convert the audio when the dvbaudiosink doesn't
support the format

* servicemp3:

- follow GstBuffer API changes
- follow gstreamer api changes
- fix gstreamer assertions, iterating elements
- add sanitychecks on subtitle caps
- fix getting text-tags
- support text/x-raw subtitle caps

* servicedvb: allow timeshift to be started on an http ts stream

* Export timeshift helper functions

* channelselection:
From setup menu in channelselection go back to channelselection.
So you can toggle channelselectioncontextmenuCustomise
and configchannelselection

* Fix crash when writing epg cache to the disk:
Timestamp in contentTimeMap can differ from eventData timestamp.
In such cases eventData is not removed from timeMap. timeMap is
used in eEPGCache::save which accesses in such a case freed memory.
This can cause crash.

**Contenu caché: Cliquez sur Thanks pour afficher. **

[chenoui70]

Sim2-dreambox-image-dm800-20160105-#84d-Jasper
24_01_2016_BY_ZVONKO67
Image_Clone


DMM Image Experimental (opendreambox-2.0.0)
Clean, no changes.
Sim2
SSL84d
Enigma2: 2015-12-30-tarball
################################################## ########## #############################
Webinterface is working.
Teletext is working.
################################################## ########## #############################

**Contenu caché: Cliquez sur Thanks pour afficher. **

THX TO Jasper

Sim2-OoZooN-Image-dm800-20160117-#84d-FE-Jasper
23_01_2016_BY ZVONKO67
Image_Clone
changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory
Sim2
SSL84d
Enigma2: 2015-12-30-tarball
################################################## #######################################
Webinterface is working.
Teletext is working.
################################################## #######################################
No WLAN driver included (this is a feature of OoZooN image):

1.Open a Telnet session to install or use Blue/Software Management/Manage Extensions/Network/ to install:
opkg install enigma2-plugin-systemplugins-wirelesslan

2.Open a FTP session and exchange the plugin.py
/usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
with a patched one

**Contenu caché: Cliquez sur Thanks pour afficher. **

reboot

################################################## ########## #############################

Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander

Menu
Setup
System
Storage device
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Red Button: Initialize
after the USB memory stick is formatted do not mount it

3. Reboot your box (this is important also if you just use an already ext3 formatted USB memory stick without initialize)

4. Extend your Flash memory using FlashExpander

Blue Button
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box

5. check if FlashExpander is working

Blue Button
Start Flashexpander

6. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB

################################################## ########## ###############################

**Contenu caché: Cliquez sur Thanks pour afficher. **

THX TO Jasper

[chenoui70]

Sim2-newnigma2_stable_dm800_v4.0.16-FE-#84d-Jasper
31_01_2016_BY_MaGnUs
Image_Clone


changes:
FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory
Sim2
SSL84d
Enigma2: 2015-12-30-tarball
################################################## ####################################
Webinterface is working.
Teletext is working.
################################################## ####################################
Deactivate Firmware Update (Newnigma2 Services/SystemToo/SystemSettings)
################################################## ####################################
Extend your Flash memory to an USB memory stick:
1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander
Menu
Setup
System
Storage device
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Red Button: Initialize
after the USB memory stick is formatted do not mount it
3. Reboot your box (this is important also if you just use an already ext3 formatted USB memory stick without initialize)
4. Extend your Flash memory using FlashExpander
Blue Button
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box
5. check if FlashExpander is working
Blue Button
Start Flashexpander
6. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB
################################################## ##

**Contenu caché: Cliquez sur Thanks pour afficher. **

THX TO Jasper

[chenoui70]

Sim2-Merlin-3_OE-2.0-dm800-20151025-FE-#84d-Jasper
14_02_2016_BY_MaGnUs
Image_Clone
changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory
Sim2
SSL84d
Enigma2: 2015-05-28-tarball
################################################## ##
Webinterface is working.
Teletext is working.
################################################## ##
Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander

Menu
Setup
System
Storage device
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Red Button: Initialize
after the USB memory stick is formatted do not mount it
3. Reboot your box (this is important also if you just use an already ext3 formatted USB memory stick without initialize)
4. Extend your Flash memory using FlashExpander

Menu
Plugins
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box
5. check if FlashExpander is working

Menu
Plugins
Start Flashexpander
6. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB
################################################## ##

Download:

2016-02-14

**Contenu caché: Cliquez sur Thanks pour afficher. **

Merlin Cam Feed:

**Contenu caché: Cliquez sur Thanks pour afficher. **

Thx To Jasper

[chenoui70]

OpenPLI-4.0-+Gstreamer+1.7.2_Ferrari-SSl88F_DM800_20_02_2016_RAED

_BY_ZVOKO67_Image_Clone

Clean and Faster image For Internal and External Flash
Patched Under Ubunut
-This Image For (Jafhar sim) (Big Thank's MastaG)
-Modded to Ferrari DM800 Boxes
-Added last drivers 20131228
-Privet Japhar sim Feed
-IPTV(Works Very Fast)

About remote control How to adjustment >>
menu
setup
system
extra settings
input device
press ok to dreambox remote control (native) and adjustment as you like ..

Warning:Don't Make Update Online

**Contenu caché: Cliquez sur Thanks pour afficher. **