Vu+ Solo2 lorinsun en erreur

[Takodz]

Bonjour à tous,

Depuis peu, j'ai remis en marche un Vu+ Solo2 clone lorinsun, le démarrage et la configuration fonctionne bien, mais dès que l'image apparait le sablier se met en marche et plus rien ne fonctionne.
J'ai récupéré la log de boot (via hyperterminal) après réinstallation d'une Blackhole, et j'ai vu pas mal d'erreur dont un "effrayant" !!!!! UNC read error occurred, while reading from NAND flash dès le démarrage.
Si quelqu'un peut aider, ce serait sympa.

Merci par avance.

log:

BCM7356B2 CFE Build Date: Fri Nov 23 11:23:42     2012 Vuplus team
Copyright (C) Broadcom Corporation.


!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
CPU speed:       1305MHz
Total memory(0): 1024MB
DDR Freq:        800 MHz
DDR Mode:        DDR3
DEV TECH:        2048MBIT
DDR Width:       32
Boot Device:     NAND
Total flash:     256MB


Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
Saving shmoo values...
Saved shmoo values....


CFE initialized.


USB: New device connected to bus 3 hub 1 port 1[J




USB: Resetting device on bus 3 hub 1 port 1[J


USB: Locating Class 08 Vendor 13FE Product 4100: Mass-Storage Device


USBMASS: Unit 0 connected[J


waiting for usb...done
checking usb
Found high priority Mass Storage bus = 3, index  = 0 
checking front key
readFrontKey 0 0
Checking usbdisk0:/vuplus/solo2/ignore.update......NO
Checking usbdisk0:/vuplus/solo2/force.update......NO
Checking usbdisk0:/vuplus/solo2/cfe_cfe_auto.bin......NO
Checking usbdisk0:/vuplus/solo2/root_cfe_auto.bin......YES
Checking usbdisk0:/vuplus/solo2/splash_cfe_auto.bin......YES
Checking usbdisk0:/vuplus/solo2/kernel_cfe_auto.bin......YES
Checking usbdisk0:/vuplus/solo2/reboot.update......YES
waiting for update key
ACK : 
readFrontKey 0x0
ACK : 
ACK : 
readFrontKey 0x0
ACK : 
ACK : 
readFrontKey 0x0
ACK : 
Skipping USB Update
Starting splash screen.
Found splash image - Width = 720 Height = 480
Non Interlaced Replace list 009f8100 0c800000Interlaced Replace list 009f86a0 0c8005a0
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M
Loading: 0x80001000/7834432 0x80779b40/142800 Entry address is 0x805d4e50
Starting program at 0x805d4e50


Linux version 3.13.5 (buildserver@buildserver) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #1 SMP Thu Jul 24 21:41:44 CEST 2014
Fetching vars from bootloader... found 16 vars.
Options: moca=0 sata=1 pcie=0 usb=1
Using 1024 MB + 0 MB RAM (from CFE)
bootconsole [early0] enabled
CPU0 revision is: 00025a11 (Broadcom BMIPS5000)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 30000000 @ 20000000 (usable)
bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
Zone ranges:
  Normal   [mem 0x00000000-0x4fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
  node   0: [mem 0x20000000-0x4fffffff]
Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
PERCPU: Embedded 7 pages/cpu @8180a000 s6976 r8192 d13504 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
Kernel command line: ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 572944K/1048576K available (6014K kernel code, 275K rwdata, 1160K rodata, 216K init, 114K bss, 475632K reserved)
Hierarchical RCU implementation.
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 1305 MHz (163.135 MHz counter)
Calibrating delay loop... 864.25 BogoMIPS (lpj=432128)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU1 revision is: 00025a11 (Broadcom BMIPS5000)
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active high; overcurrent is active low
USB1: power enable is active high; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Registering unionfs 2.5.13 (for 3.13.7)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 [email protected]).
msgmni has been set to 1119
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [early0] disabled
bootconsole [early0] disabled
serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
loop: module loaded
ahci strict-ahci.0: can't get clock
ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
ahci strict-ahci.0: flags: ncq sntf stag clo slum part 
scsi0 : ahci_platform
scsi1 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
brcmstb_nand: NAND controller driver is loaded
Found PHY at Address 3
bcmgenet: configuring instance #0 for external RGMII
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ata1: SATA link down (SStatus 0 SControl 300)
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-brcm ehci-brcm.2: Broadcom STB EHCI
ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm ehci-brcm.3: Broadcom STB EHCI
ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
ata2: SATA link down (SStatus 0 SControl 300)
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
usb 4-1: new high-speed USB device number 2 using ehci-brcm
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Success! Registering the characther device  success with 0
blackhole initialised
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
NAND device: 256MiB, SLC, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Bad block table found at page 131008, version 0x07
Bad block table found at page 130944, version 0x07
nand_read_bbt: bad block at 0x000000700000
nand_read_bbt: bad block at 0x000001aa0000
nand_read_bbt: bad block at 0x0000030c0000
nand_read_bbt: bad block at 0x000003780000
usb-storage 4-1:1.0: USB Mass Storage device detected
scsi2 : usb-storage 4-1:1.0
nand_read_bbt: bad block at 0x000006b40000
nand_read_bbt: bad block at 0x000007ee0000
nand_read_bbt: bad block at 0x000007fe0000
nand_read_bbt: bad block at 0x00000a780000
nand_read_bbt: bad block at 0x00000b720000
nand_read_bbt: bad block at 0x00000bfa0000
nand_read_bbt: bad block at 0x00000c260000
nand_read_bbt: bad block at 0x00000de80000
nand_read_bbt: bad block at 0x00000e4e0000
Creating 4 MTD partitions on "brcmnand.0":
0x000001f00000-0x000010000000 : "rootfs"
0x000001f00000-0x000010000000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
random: nonblocking pool is initialized
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 225 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 1785, bad PEBs: 15, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 286/56, WL threshold: 4096, image sequence number: 152570206
UBI: available PEBs: 0, total reserved PEBs: 1785, PEBs reserved for bad PEB handling: 25
UBI: background thread "ubi_bgt0d" started, PID 55
scsi 2:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
sd 2:0:0:0: Attached scsi generic sg0 type 0
ALSA device list:
  No soundcards found.


sd 2:0:0:0: [sda] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 59
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 221573120 bytes (211 MiB, 1745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 8D3491DA-D7E2-4175-951A-FFA694391F21, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:12.
devtmpfs: mounted
Freeing unused kernel memory: 216K (8074a000 - 80780000)


INIT: version 2.88 booting


UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
NET: Registered protocol family 10
procmk_init
dvb_bcm7356: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vusolo2)
bcm7356: hotplug_callback(): 
Hotplug - status.connected 0:0
[GP]:brcm_pwm_init


brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[MPVR]: >> misc_pvr_init
[VID]: 6bcm7335_video_init
[AUD]: 6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
BKNI_Malloc(linuxkernel) top users:
    blocks,   bytes, filename:line
      1024,  176128, portinginterface/hsm/src/common/bhsm.c:500
       691,  158468, BSEAV/lib/utils/balloc.c:31
       384,   24576, magnum/commonutils/mrc/src/bmrc_monitor.c:666
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
0:80
[CI]: registered ci0
[DFP]: registered dbox fp
[DFP]: Scart 9597 is found 4


[SC]: registered sci0
[SC]: registered sci1
system_time_set wakeup mode get 
system_time_set wakeup mode get 0xc4
fpga update driver loaded
Startting the hotplug events dispatcher
udevd (126): /proc/126/oom_adj is deprecated, please use /proc/126/oom_score_adj instead.
Synthesizing the initial hotplug events
Waiting for /dev to be fully populated
udevd-event[231]: node_symlink: rename(/dev/fb.udev-tmp, /dev/fb) failed: Is a directory




done
Displaying bootlogo.
[VID]: VIDEO_SET_STREAMTYPE 0 
[VID]: VIDEO_SELECT_SOURCE 1  0
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1 
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0  0
Configuring network interfaces... IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc (v1.19.4) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
zeroconf calls setitimer() with new_value NULL pointer. Misfeature support will be removed
done.
Starting portmap daemon...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.min_free_kbytes = 16384
crond[624]: cron
INIT: Entering runlevel: 3


Starting system message bus: dbus.
Starting Dropbear SSH server: dropbear.
Starting automounter: done.
[SCRIPT] start: Common Interface
Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf
Could not open configuration file '/etc/hostapd.conf' for reading.
Starting internet superserver: inetd.
Starting portmap daemon...
creating NFS state directory: done
starting 8 nfsd kernel threads: svc: failed to register lockdv1 RPC service (errno 124).
done
starting mountd: done
starting statd: done
exportfs: /media/hdd does not support NFS export
exportfs: No host name given with /media/hdd (rw,async,wdelay,hide,nocrossmnt,secure,no_root_squash,no_all_squash,no_subtree_check,secure_locks,acl,anonuid=65534,anongid=65534), suggest *(rw,async,wdelay,hide,nocrossmnt,secure,no_root_squash,no_all_squash,no_subtree_check,secure_locks,acl,anonuid=65534,anongid=65534) to avoid warning
Starting syslogd/klogd: done
UsbTuner v0.3.14-BETA1 (Build using DVBAPI 5.10)
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[A[74G[ ok ]
Starting virtual private network daemon: Autostart disabled.
[VID]: VIDEO_SET_STREAMTYPE 0 
[VID]: VIDEO_SELECT_SOURCE 1  0
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1 
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0  0
setenv('prefix', '/usr', 0)
setenv('exec_prefix', '/usr', 0)
setenv('bindir', '/usr/bin', 0)
setenv('sbindir', '/usr/sbin', 0)
setenv('libexecdir', '/usr/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '/com', 0)
setenv('localstatedir', '/var', 0)
setenv('libdir', '/usr/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/com', 1)
setenv('localstatedir', '/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
12150k video mem
 - double buffering available!
4050kB available for acceleratio[LCD]: unknown cmd 0x1015
n surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x720bf0 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) Hdmi CEC driver
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
+ (21) input device driver
Input device "d[CI]: CI interface initialised


reambox advanced remote control (native)" is not a keyboard.
Found 1 input devices!
+ (21) Console RC Driver
failed to open /dev/tty0
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
loaded 0 services
scanning for frontends..
opening frontend 0
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
opening frontend 1
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 1
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
found 1 adapter, 2 frontends(2 sim) and 9 demux, boxtype 4
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait6.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait6.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait7.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait7.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait8.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait8.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait9.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait9.png
found 8 spinner!


executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
enigma2 is the main pvr application... adjust oom score!
enumerating block devices...
found block device 'sda': ok, removable=True, cdrom=False, partitions=['sda1']
found block device 'sda1': error querying properties
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisUBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
ted
found block device 'loop7': blacklisted
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
not loading user skin:  [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
Reading satellites.xml
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/share/enigma2/unicable.xml
removing internal link on frontend id 0
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled No, DVB-S2 Yes, DVB-T2 No
setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7356 DVB-S2 NIM (internal), need rotorworkaround No, enabled No, DVB-S2 Yes, DVB-T2 No
slot: 0 configmode: nothing
slot: 1 configmode: nothing
sec config completed
Preferred tag editor set to  None
main thread is non-idle! display spinner!
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/share/enigma2/setup.xml
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
171 entries in Bouquet userbouquet.favourites.tv
1 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
cannot open /proc/stb/avs/0/input_choices
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/share/enigma2/keymap.xml
[ePopen] command: ip -o addr show dev eth0
main thread is non-idle! display spinner!
setLCDBrightness 25
setLCDBrightness 127
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
Activating keymap: Keyboard English
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/share/keymaps/
[ePopen] command: loadkmap < /usr/share/keymaps/eng.kmap
Activating language English
language set to en_EN
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
[RemoteChannelStreamConverter] fallback to default translation for Remote channel stream converter
[RemoteChannelStreamConverter] fallback to default translation for Convert remote channel list for streaming
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/share/enigma2/setup.xml
resolve: resolve ${libdir}
resolve: -> /usr/lib
[MeoBoot] set language to  en
[MeoBoot] set language to  en
[MeoBoot] fallback to default translation for E2 Light Multiboot
Restarting internet superserver: inetd .
<ZappingModeSelection> set zapping mode : mute
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> setting scaler_vertical_dejagging to: disable
--> setting smooth to: disable
--> applying pep values
[AutoShutDown] set language to  en
[AutoShutDown] set language to  en
[AutoShutDown] fallback to default Enigma2 Translation for Standby
[AutoShutDown] fallback to default Enigma2 Translation for Deepstandby
[AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup
[AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown
[AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup
[AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown
[AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup
[AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown
<RemoteControlCode> Write Remote Control Code : 2
remove DVI-PC because it does not exist.
hotplug on DVI
set Videomode DVI 720p multi
set aspect, policy, policy2, wss 16:9 panscan letterbox auto
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 1 CI Slots 
resolve: resolve ${sysconfdir}/enigma2/ci
resolve: -> /etc/enigma2/ci
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
starting BlackHoleapi handler
starting hotplug handler
add device sda to bdpoll current state: medium inserted
It's now  Thu Jan  1 01:00:29 1970
[timer.py] next activation: 129 (in 99909 ms)
It's now  Thu Jan  1 01:00:29 1970
[timer.py] next activation: 129 (in 99846 ms)
hbbtv.app: no process found
[browser] browser start
Looking for embedded skin
[CrossEPG_Auto] AutoStart Enabled
[CrossEPG_Auto] Schedule Disabled at Thu Jan  1 01:00:29 1970
[AutoShutDown] start....
Looking for embedded skin
port changed to DVI
mode changed to 720p
default ('720p', 'default')
preferedmodes ['1080i', '1080p', '576p', '480p', '576i', '480i', ('720p', 'default')]
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
Looking for embedded skin
setValue[AUD]: AUDIO_SET_MUTE 0 
 100
Setvolume: 100 1[AUD]: AUDIO_SET_MIXER -858743328 
00 (raw)
Setvol[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
ume: 0 0 (-1db)
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0


[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
Setvolume: 100 1[AUD]: AUDIO_SET_MIXER -858743328 
00 (raw)
Setvol[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
ume: 0 0 (-1db)
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70


[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/%s/
resolve: -> /usr/share/enigma2/%s/
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
RemovePopup, id = ZapError
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
allocating new converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
reused converter!
warning, skin is missing element Universe in <class 'Screens.InfoBar.InfoBar'>
reused converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
poll: unhandled POLLERR/HUP/NVAL for fd 31(17)
child has terminated
pipes closed
nameservers: [[202, 96, 128, 166], [202, 96, 134, 133]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'mac': '00:1d:ec:00:4a:d3', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
AT plugin not found
ER plugin not found
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443

[Islander]

Bonjour et merci de respecter le règlement
Présentation obligatoire et lecture du règlement et charte conseillée
Présentations des Membres
Débuter sur votre forum ./. règlement ./. Charte du forum

Ensuite un de nos membre se fera un plaisir de t'aider

[Takodz]

Bonjour,

En complément voici la log recueillie lorsque le récepteur ne répond plus (image et son ok, mais sablier et touches inopérantes).
Merci par avance pour votre aide.

sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
NAND device: 256MiB, SLC, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Bad block table found at page 131008, version 0x07
Bad block table found at page 130944, version 0x07
nand_read_bbt: bad block at 0x000000700000
nand_read_bbt: bad block at 0x000001aa0000
nand_read_bbt: bad block at 0x0000030c0000
nand_read_bbt: bad block at 0x000003780000
nand_read_bbt: bad block at 0x000006b40000
nand_read_bbt: bad block at 0x000007ee0000
nand_read_bbt: bad block at 0x000007fe0000
nand_read_bbt: bad block at 0x00000a780000
nand_read_bbt: bad block at 0x00000b720000
nand_read_bbt: bad block at 0x00000bfa0000
nand_read_bbt: bad block at 0x00000c260000
nand_read_bbt: bad block at 0x00000de80000
nand_read_bbt: bad block at 0x00000e4e0000
Creating 4 MTD partitions on "brcmnand.0":
0x000001f00000-0x000010000000 : "rootfs"
0x000001f00000-0x000010000000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
random: nonblocking pool is initialized
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 225 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 1785, bad PEBs: 15, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 286/56, WL threshold: 4096, image sequence number: 152570206
UBI: available PEBs: 0, total reserved PEBs: 1785, PEBs reserved for bad PEB handling: 25
UBI: background thread "ubi_bgt0d" started, PID 53
ALSA device list:
No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 56
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 221573120 bytes (211 MiB, 1745 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 8D3491DA-D7E2-4175-951A-FFA694391F21, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:12.
devtmpfs: mounted
Freeing unused kernel memory: 216K (8074a000 - 80780000)
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
NET: Registered protocol family 10
procmk_init
dvb_bcm7356: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vusolo2)
bcm7356: hotplug_callback():
Hotplug - status.connected 0:0
[GP]:brcm_pwm_init

brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[MPVR]: >> misc_pvr_init
[VID]: 6bcm7335_video_init
[AUD]: 6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7346 FE)...
BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
BKNI_Malloc(linuxkernel) top users:
  blocks,   bytes, filename:line
    1024,  176128, portinginterface/hsm/src/common/bhsm.c:500
     691,  158468, BSEAV/lib/utils/balloc.c:31
     384,   24576, magnum/commonutils/mrc/src/bmrc_monitor.c:666
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
0:80
[CI]: registered ci0
[DFP]: registered dbox fp
[DFP]: Scart 9597 is found 4

[SC]: registered sci0
[SC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
fpga update driver loaded
udevd (123): /proc/123/oom_adj is deprecated, please use /proc/123/oom_score_adj instead.
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1  0
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
brcmnand brcmnand.0: uncorrectable error at 0x900000
end_request: I/O error, dev mtdblock3, sector 0
Buffer I/O error on device mtdblock3, logical block 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0  0
__clk_enable: network [1]
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
zeroconf calls setitimer() with new_value NULL pointer. Misfeature support will be removed
svc: failed to register lockdv1 RPC service (errno 124).
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1  0
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0  0
[LCD]: unknown cmd 0x1015
[CI]: CI interface initialised

UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
[AUD]: AUDIO_SET_MUTE 0
[AUD]: AUDIO_SET_MIXER -858849824
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER -858849824
[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
bcm7356: hotplug_callback():
Hotplug - status.connected 1:0
bcm7356: hotplug_callback():
Hotplug - connecting HDMI to display 0xf
bcmgenet bcmgenet.0 eth0: link up, 100 Mbps, full duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bcm7356: hotplug_callback():
Hotplug - status.connected 0:1
bcm7356: hotplug_callback():
Hotplug - Disconnecting HDMI from display
bcm7356: hotplug_callback():
Hotplug - status.connected 1:0
bcm7356: hotplug_callback():
Hotplug - connecting HDMI to display 0xe
bcm7356: hotplug_callback():
Hotplug - status.connected 1:1
[AUD]: AUDIO_SET_MUTE 1
[AUD]: AUDIO_SET_MUTE 0
bcm7356: hotplug_callback():
Hotplug - status.connected 1:1
FE tune
FE tune
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: downmix 0 state : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1  0
[VID]: VIDEO_PLAY 1  2 2
[VID]: VIDEO_SLOWMOTION 0    1
[VID]: VIDEO_FAST_FORWARD 0    1
[VID]: VIDEO_CONTINUE 1  1
[AUD]: AUDIO_CONTINUE 1 1 aph=0xccf0a680
[AUD]: Mute : 0
[AUD]: AUDIO_CHANNEL_SELECT 0
CPU 0 Unable to handle kernel paging request at virtual address 0000004c, epc == e0b2f480, ra == e0b2f480
Oops[#1]:
CPU: 0 PID: 88 Comm: nx_sched_low Tainted: P           O 3.13.5 #1
task: cf5aeda0 ti: cd6ba000 task.ti: cd6ba000
$ 0   : 00000000 10108700 cd6bbd38 00000001
$ 4   : cd6bbdf0 00000000 00000000 e0ba0000
$ 8   : 00000038 80340b18 00000000 00000000
$12   : 00000000 8180a2a4 00000000 3b9aca00
$16   : cd6bbd38 00000000 e11024b4 00000006
$20   : e0af9e60 e0afa740 e0afdccc e0b00000
$24   : 00000000 80340a60
$28   : cd6ba000 cd6bbbb8 e0ba0000 e0b2f480
Hi    : 0000547b
Lo    : eccb6800
epc   : e0b2f480 NEXUS_VideoDecoder_P_GetStatus_Generic+0x40/0x28c [dvb_bcm7356]
  Tainted: P           O
ra    : e0b2f480 NEXUS_VideoDecoder_P_GetStatus_Generic+0x40/0x28c [dvb_bcm7356]
Status: 10108703        KERNEL EXL IE
Cause : 00800008
BadVA : 0000004c
PrId  : 00025a11 (Broadcom BMIPS5000)
Modules linked in: ext2 fpga_directc(PO) brcmfb(O) dvb_bcm7356(PO) procmk(O) ipv6
Process nx_sched_low (pid: 88, threadinfo=cd6ba000, task=cf5aeda0, tls=00000000)
Stack : 00000000 00000000 807163b4 cfc52d80 818134c0 80710000 80710000 807794c0
        80710000 f642f680 cfc52d00 80065e50 8068a9b4 80075860 807163b4 00000000
        cfc52d80 00000000 00000000 00000001 818134c0 00000000 00000000 00000002
        00000000 81812418 00000000 00000000 00000020 cd6bbd38 00000000 e11024b4
        00000006 e0af9e60 e0afa740 e0b2f6f8 807794c0 81812418 00000000 80074e4c
        ...
Call Trace:
[<e0b2f480>] NEXUS_VideoDecoder_P_GetStatus_Generic+0x40/0x28c [dvb_bcm7356]
[<e0b2f6f8>] NEXUS_VideoDecoder_P_GetStatus_Avd+0x2c/0x310 [dvb_bcm7356]
[<e0b3abf4>] NEXUS_VideoDecoder_GetStatus+0x30/0x50 [dvb_bcm7356]
[<e0aafe14>] bcm7335_source_changed+0x24/0x350 [dvb_bcm7356]
[<e0afcbc8>] NEXUS_P_Scheduler_Step+0x85c/0x944 [dvb_bcm7356]
[<e0afcc90>] NEXUS_P_Scheduler_Step+0x924/0x944 [dvb_bcm7356]


Code: 24424090  0040f809  240600b8 <8e22004c> 1040003b  3c12e110  3c15e0ba  26442e74  26b534f4
---[ end trace f099f2d3be3a671d ]---
CPU 1 Unable to handle kernel paging request at virtual address 00000000, epc == 805dd3a8, ra == 805dd328
Oops[#2]:
CPU: 1 PID: 845 Comm: enigma2 Tainted: P      D    O 3.13.5 #1
task: cd359b20 ti: cccee000 task.ti: cccee000
$ 0   : 00000000 00000001 00000000 cccefd50
$ 4   : e11482c8 00000000 00000001 804676d4
$ 8   : 00000000 84080008 800f2ae4 00000000
$12   : 7fa87d28 7fa88df0 7fa88db0 01c00d38
$16   : e11482c4 00000000 00000001 e11482c8
$20   : cd359b20 00010000 80710000 e11482cc
$24   : 004925a8 772271ac
$28   : cccee000 cccefd38 7fa88e80 805dd328
Hi    : 2c396d5e
Lo    : 00000001
epc   : 805dd3a8 __mutex_lock_interruptible_slowpath+0x1e0/0x32c
  Tainted: P      D    O
ra    : 805dd328 __mutex_lock_interruptible_slowpath+0x160/0x32c
Status: 10108b03        KERNEL EXL IE
Cause : 0080000c
BadVA : 00000000
PrId  : 00025a11 (Broadcom BMIPS5000)
Modules linked in: ext2 fpga_directc(PO) brcmfb(O) dvb_bcm7356(PO) procmk(O) ipv6
Process enigma2 (pid: 845, threadinfo=cccee000, task=cd359b20, tls=77d3f490)
Stack : cccefd98 8008d8b0 00000000 80039e7c 00000000 00000001 e11482cc 00000000
        fffffff5 10108b01 e1364000 e11482c4 00000001 e114827c 00000013 00000001
        0000001b 7fa88f80 7fa88e80 80467718 0074dd58 00000000 cccefd98 80079b8c
        8078b7f4 00000000 20006f2a 00000000 00000000 cd377b40 20006f2a 00000001
        00000001 00000013 00000001 0000001b 7fa88f80 804659f4 ffffffff cf8e5030
        ...
Call Trace:
[<805dd3a8>] __mutex_lock_interruptible_slowpath+0x1e0/0x32c
[<80467718>] dvb_demux_do_ioctl+0x44/0x618
[<804659f4>] dvb_usercopy+0xec/0x1d0
[<800f24ec>] do_vfs_ioctl+0x98/0x690
[<800f2b30>] SyS_ioctl+0x4c/0x8c
[<80011030>] handle_sys+0x130/0x150


Code: afb70018  afa2001c  3c168071 <ac430000> 3c150001  afb40020  2411ffff  24120001  8e020000
---[ end trace f099f2d3be3a671e ]---