OpenPLi 4.0 avec 750 chaines IPTV GRATUITES pour DM800HD/DM800HDse/DM8000HD/DM500HD

[toysoft]

OpenPLi 4.0 with 750+ FREE IPTV Channels for DM800HD/DM800HDse/DM8000HD/DM500HD (Japhar Sim)

Nouvelle version 20 Novembre 2015 avec toute dernière GStreamer 1.6.2, extrèmement stable pour IPTV !


- Gstreamer (v1.6.2) has been updated to master git which carries many fixes.
- No more internet connection required during bootup.
- Feeds online for online update of image and future updates/fixes if necessary.
- IPTV List and Jam Panel are now pre-shipped.
- Japhar Addon Manager 5.2 included.
- IPTV List built-in with 750+ IPTV FREE Channels.
- Many dvbmediasink fixes.
- Many stuff I forgot :P

**Contenu caché: Cliquez sur Thanks pour afficher. **

TS

[rachidbeo55]

Bonjour est-ce que cette image est valable pour DM 800 HD se sim 2.10 ssl 84b ?
Merci de répondre.

[Islander]

Bonjour
je ne sais pas mais ils disent pour sim japhar
Donc si tu ne sais pas reparer les NO CA FOUND ne prend pas de risque
Au pire on sera là pour t'aider mais bon ... un homme averti en vaut 2

[toysoft]

- Gstreamer 1.6.x has been updated
- Newer gstreamer 1.6.x master git snapshot:
They've pretty much reworked HLS (m3u8) handling completely.
There should be no more jumps when switching bitrates.
- DTS Downmix should now be working on the dm800se, dm500hd and dm8000.
Also pausing the video should work now (untested).
- Fragmented streams work now (m3u8)
- Remote control delay is now set by default to 300ms
- Feeds online for online update of image and future updates/fixes if necessary.
- Improved streaming performance in both the dvbmediasink and enigma2, Dreambox fixes for the dvbmediasink:
Framerate and resolution should now be handled correctly.
- Fragmented streams should now play more smooth and give less freezes due to async changes.
- IPTV List and JAM 5.2 Panel are now pre-shipped.
- Japhar Addon Manager 5.2 included.
- IPTV List built-in with 800+ IPTV FREE Channels.

**Contenu caché: Cliquez sur Thanks pour afficher. **

Je me permet une traduction sommaire :
t- Gstreamer 1.6.x a été mis à jour - Récent 1.6.x GStreamer maître git instantané: Ils ont à peu près retravaillés HLS (M3U8) manutention complètement. Il ne faut pas plus de sauts lors de la commutation des débits. - DTS Downmix devrait maintenant fonctionner sur le dm800se, DM500HD et DM8000.
Aussi pause de la vidéo devrait maintenant fonctionner (non testé). - Fragmenté flux de travail aujourd'hui (M3U8) - Retard de commande à distance est maintenant réglé par défaut à 300 ms - Flux ligne pour la mise à jour en ligne des images et de futures mises à jour / corrections si nécessaire. -

[toysoft]

Available OpenPLi 4.0 MastaG GStreamer 1.7.0 !

Changes compared to openpli-oe-core gst-1:


- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1, no changes or extra patches added.
Only patch I've removed is: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch,
because that patch is already accepted and commited to upstream git.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by Christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- DM800 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any DM800 2.6.18 kernel module from OE1.5 to 2.0.

and

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1, no changes or extra patches added.
Only patch I've removed is: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch,
because that patch is already accepted and commited to upstream git.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by Christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- DM800 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any DM800 2.6.18 kernel module from OE1.5 to 2.0.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.

Update online or get the new version on the web.

[toysoft]

Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!

**Contenu caché: Cliquez sur Thanks pour afficher. **

Changes since previous release:


- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)


Changes compared to openpli-oe-core gst-1:


- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.


Known issues:


- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

**Contenu caché: Cliquez sur Thanks pour afficher. **

[toysoft]

Changes since last release:
- gstreamer upgraded to 1.7.90 (nearing the final 1.8 release)
- ffmpeg updated to 3.0
- gstreamer1.0-libav is now build against ffmpeg (thx to Taapat).
- a patch from mx3L for servicemp3 that should speed up IPTV zapping
- a second patch from mv3L for servicemp3 that should fix a possible GSOD when switching audio tracks
- a third patch from mx3L for the dvbmediasink that should fix a possible GSOD on seeking in mp4 streams
- support for bluray isos by Taapat
- remote controls should now have their media-button working
- added X Solo Mini 3 build
- New vermagic magics, you should be able to load any kernelmodule again.
- patch by christophecvr for setting the debug level in Menu -> Settings -> User-interface settings.


Note :
The patch for setting the debug level is very important since it fixes many possible IPTV issues on slower receivers like the DM800.
Its highly recommended to set it level 0

**Contenu caché: Cliquez sur Thanks pour afficher. **

[toysoft]

OpenPLi 4.0 IPTV GStreamer 1.8.0 by MastaG (v16)





Changes:
- Gstreamer 1.8.0 stable release
- New PLi spring logo
- Upgrade OpenVPN to 2.3.8
- Upgrade OpenSSH to 7.1p2
- Upgrade OpenSSL to 1.0.2g
- Patched and bumped Python due to OpenSSL not supporting SSLv3 anymore
- Upgrade Japhar-IPTV list to 1.6
- Upgrade rtmpdump from oe-alliance and let it provide librtmp as well
- Upgrade ffmpeg to 3.0.1
- Patch for dvbmediasink from mx3L for writing PTS on every PES header
This could possible fix some m3u8 streams freezing
- Removed the patch for dvbmediasink which should fix seeking in some mp4 streams
Since I couldn't reproduce the problem
- Rewrote Dreambox kernel recipes which should fix certain models not booting
- Fixed CrossEPG
- Fixed very large Packages.gz on the server
- Merged latest openpli-oe-core changes
- Merged latest OpenPLi enigma2 changes
- Upgrade oscam to rev 11225 and applied joeuser's latest tryfix oscam-emu patch
Emulating PowerVU should now work for multiple pids
- Lots of stuff I forgot...

**Contenu caché: Cliquez sur Thanks pour afficher. **

[Islander]

Merci de bien vouloir masquer vos liens comme le stipule le règlement
Unique avertissement
Je ne le ferai plus a l'avenir