Re : Images dreambox 7020
Newnigma2 team proudly presents:Newnigma2 v4.0.16_Images_Originale_BY_G-ogi_V2_Stable
Basics:
- Enigma2 4.0: 30.12.2015
- Enigma2 Plugins: 02.01.2016
- Newnigma2 Plugins: 02.01.2016
DM 7020 HD
- driver: 02.12.2015
- secondstage: 89
- kernel 3.2.68
changelog E2 30.12.2015:
- dvbnamespace is now always 0xFFFF0000 for DVB-C and 0xEEEE0000 for DVB-T (compatible with OE2.2)
- fixed possible crashes / endless loops on title change in mediaplayer (introduced in 20151202 tarball)
- fixed possible crashes on try to play unaccessible mediafiles
- fixed possible deadlock caused by media subtitles
- fixed audio/subtitle selection on movie playback with players opened via mainmenu
- better compatibility with external plugins which patches the ChannelSelection
- fixed crash on non driver based cable transponder search
changelog E2 02.12.2015:
- fixed H264 video detection of some TV services (sometimes AC3 descriptors are sent on the videopid?!?.... ignore this for now)
- CommonInterfaceAssignment: dont crash when no accessible CI is available
- allow to override broken transponders (same TSID/ONID combinations) via /etc/enigma2/scan_tp_valid_check.py again
- DVDPlayer
- reset the in_menu state on service stop (fixes buttons not working on next service start .. probably after choosing another iso file or dvd folder via filebrowser)
- small fixes (from go4dream) - unicable.xml: add Spaun SUS5581/33NF models (thx to Uenz)
- PicturePlayer: allow to disable the pictureplayer border to allow unscaled pictures up to skin resolution
useful for displaying test images to optimize sharpness, contrast, brightness settings) - set http timeout for servicemp3 streaming to 30 seconds
- delay playService requests until the ChannelSelection is fully initialized
- fixed hbbtv video download
- added si2166b blindscan support
- added use SCPC search range option for si2166b tuner
- show correct nim slot descriptions in infobar and serviceinfo dialog (A1/A2/B1/B2) skin must support this!!
- optimized speed of servicescan without NIT a bit
- small dvdplayer fixes (from go4dream)
Notice: Update from v4.0.x to 4.0.16 only possible by updating via console.
Changes:
- Added: Newnigma2 FileBrowser
- Added: Skin Evolution-HD by Kerni (thx)
- Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
- Added: Kerni.Gnome-HD by Kerni (thx)
- Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
- Added: swapmanager
- Added: wget
- Added: stat
- Added: weathercomponent (needed for some skins)
- Added: eventposition (needed for some skins)
- Added: reftopiconname (needed for some skins)
- Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
- Added: Black-Box.HD.ME (32bit skin)
- Added: cryptsetup more information
- Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
- Added: free space check's before installing or upgrade packages
- Added: min free flash space is 3mb for installing/upgrading some packages
- Added: improve network connectivity check in newnigma2 installer
- Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
- Added: readded extendedinfobar
- Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
- Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
- Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
- Bugfix: neutrino keymap
- Bugfix: newnigma2.Kerni.PanTV-HD icons
- Bugfix: Caid Renderer didn't close ecm.info and share.info properly
- Bugfix: for loading wrong or no newnigma2 service menu png's
- Bugfix: loosing picon value in servicelist after using configsaver
- Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
- Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
- Bugfix: broken gui installer
- Update: Some improvements on our onlineinstaller
- Update: znc to version 1.4
- Update: openvpn to version 2.3.4
- Update: german translation
- Update: picon renderer. create piconSList dir for servicelist picons.
- Update: IPTV-List-Updater
- Update: cryptsetup
- Update: openssl
- Removed: we have removed non working plugins. most of them are integrated in mediaportal.
- Removed: keymanger plugin from image. It's still available from our feed.
- here u can find USB to UART driver
- here u can find DreamUP V1.3.3.11
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.16:
if you have troubles by upgrading to v4.0.16 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".
Wichtige Änderungen:
1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"
2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.
3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!
4. Bei Problemen mit dem Update auf v4.0.16:
Sollte das Update auf v4.0.16 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.
Your
Newnigma2 Team
http://i.imgur.com/r3IfSeR.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
Newnigma2 team proudly presents:Newnigma2 v4.0.16_By_G-ogi_Stable
################################################## ###################
Basics:
- Enigma2 4.0: 30.12.2015
- Enigma2 Plugins: 02.01.2016
- Newnigma2 Plugins: 02.01.2016
DM 7020 HD
- driver: 02.12.2015
- secondstage: 89
- kernel 3.2.68
changelog E2 30.12.2015:
- dvbnamespace is now always 0xFFFF0000 for DVB-C and 0xEEEE0000 for DVB-T (compatible with OE2.2)
- fixed possible crashes / endless loops on title change in mediaplayer (introduced in 20151202 tarball)
- fixed possible crashes on try to play unaccessible mediafiles
- fixed possible deadlock caused by media subtitles
- fixed audio/subtitle selection on movie playback with players opened via mainmenu
- better compatibility with external plugins which patches the ChannelSelection
- fixed crash on non driver based cable transponder search
changelog E2 02.12.2015:
- fixed H264 video detection of some TV services (sometimes AC3 descriptors are sent on the videopid?!?.... ignore this for now)
- CommonInterfaceAssignment: dont crash when no accessible CI is available
- allow to override broken transponders (same TSID/ONID combinations) via /etc/enigma2/scan_tp_valid_check.py again
- DVDPlayer
- reset the in_menu state on service stop (fixes buttons not working on next service start .. probably after choosing another iso file or dvd folder via filebrowser)
- small fixes (from go4dream) - unicable.xml: add Spaun SUS5581/33NF models (thx to Uenz)
- PicturePlayer: allow to disable the pictureplayer border to allow unscaled pictures up to skin resolution
useful for displaying test images to optimize sharpness, contrast, brightness settings) - set http timeout for servicemp3 streaming to 30 seconds
- delay playService requests until the ChannelSelection is fully initialized
- fixed hbbtv video download
- added si2166b blindscan support
- added use SCPC search range option for si2166b tuner
- show correct nim slot descriptions in infobar and serviceinfo dialog (A1/A2/B1/B2) skin must support this!!
- optimized speed of servicescan without NIT a bit
- small dvdplayer fixes (from go4dream)
Notice: Update from v4.0.x to 4.0.16 only possible by updating via console.
Changes:
- Added: Newnigma2 FileBrowser
- Added: Skin Evolution-HD by Kerni (thx)
- Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
- Added: Kerni.Gnome-HD by Kerni (thx)
- Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
- Added: swapmanager
- Added: wget
- Added: stat
- Added: weathercomponent (needed for some skins)
- Added: eventposition (needed for some skins)
- Added: reftopiconname (needed for some skins)
- Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
- Added: Black-Box.HD.ME (32bit skin)
- Added: cryptsetup more information
- Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
- Added: free space check's before installing or upgrade packages
- Added: min free flash space is 3mb for installing/upgrading some packages
- Added: improve network connectivity check in newnigma2 installer
- Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
- Added: readded extendedinfobar
- Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
- Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
- Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
- Bugfix: neutrino keymap
- Bugfix: newnigma2.Kerni.PanTV-HD icons
- Bugfix: Caid Renderer didn't close ecm.info and share.info properly
- Bugfix: for loading wrong or no newnigma2 service menu png's
- Bugfix: loosing picon value in servicelist after using configsaver
- Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
- Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
- Bugfix: broken gui installer
- Update: Some improvements on our onlineinstaller
- Update: znc to version 1.4
- Update: openvpn to version 2.3.4
- Update: german translation
- Update: picon renderer. create piconSList dir for servicelist picons.
- Update: IPTV-List-Updater
- Update: cryptsetup
- Update: openssl
- Removed: we have removed non working plugins. most of them are integrated in mediaportal.
- Removed: keymanger plugin from image. It's still available from our feed.
- here u can find USB to UART driver
- here u can find DreamUP V1.3.3.11
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.16:
if you have troubles by upgrading to v4.0.16 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".
Wichtige Änderungen:
1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"
2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.
3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!
4. Bei Problemen mit dem Update auf v4.0.16:
Sollte das Update auf v4.0.16 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.
Your
Newnigma2 Team
http://i.imgur.com/r3IfSeR.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
Re : Images dreambox 7020
D.M.S-dm7020hd+dm7020hdv2_OE2-v4.6_Images_Originale_BY_DRAGEC11
http://s30.postimg.org/y447xhstt/bootlogo.jpgD.M.S-image-dm7020hd-OE2-v4.6.nfi
Date: 2016-01-14 09:07
Enigma2: 3.999git20151231-r11.1
Distro: opendreambox 2.0.0
Machine: Dreambox dm7020hd
Link: installable software packages for dm7020hd
MD5: b093079ef5f3122d3fd8848375c17d04
SHA256: 7f9192c835e03014d0a2a1eecbcb63811b4d71c458a569dc83 3b48820d1850d1
Genuine image with the Last CVS
Creatori immagini
°°ANTR@G°°
-----------------------
Sviluppatore del blue panel
asanovich
--------------------
Beta tester
°°ANTR@G°°
tonino1956
Skin Default Dreamy
-------------------------------------
many new updates Enigma2
-------------------------------------
potete scaricare i picon by mmark dal pannello demonisat
----------------------------------------------------------
New Memory Info Thanks m43c0
New DynDNS Thanks m43c0
Aggiunto OpenVPN Thanks m43c0
You can download picon by mmark panel demonisat
New bootlogo demonisat
---------------------------------------------
queste images contengono solo 3 lingue
Italiano, inglese,Tedesco
potete scaricare la vostra lingua preferita dal pannello demonisat
if you want to download other plugins go
menu / plugin
Manage extensions
--------------------------------------------------------------------
these images contain only 3 languages
Italian English Deutsch
you can download your preferred language from the panel demonisat
Added language Brazilian downloaded from the panel demonisat
---===ooo0ooo===---
Raccomandiamo di non fare aggiornamento software
possibilmente mettere immagine in flash
si ringrazia gli autori dei vari plugin skin patch etc etc
------------------------------------------------------------
We recommend not to do software update
possibly to put image in flash
we thank the authors of the various plugins skin patches etc etc
----------------------------------
New Blue Panel demonisat
You'll find everything you need
for the operation of the image
to download from the panel demonisat put the DHCP automatically
About to more than one satellite is set to expert enable multiple bouquets
menu, settings, system, customize
set of expert
Per poter scaricare dal pannello demonisat dovete mettere il DHCP in Auto !!
impostare su esperto é abilitare multiple bouquet
menu,impostazioni,sistema,personalizzare
impostare su esperto
thanks to the authors of the various skin patch plugins etc etc !!
D.M.S-dm7020hd-OE2-v4.6_Images_Originale
http://i.imgur.com/r3IfSeR.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
D.M.S-dm7020hdv2-OE2-v4.6_Images_Originale
http://i.imgur.com/r3IfSeR.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
Re : Images dreambox 7020
D.M.S-dm7020hd+dm7020hdv2_OE2-v4.6_Images_Originale
Date: 2016-01-17
Enigma2: 3.999git20151231-r9.1.0
Distro: opendreambox 2.0.0
Machine: Dreambox dm7020hd
Issuer: OoZooN
MD5: 21543d7ddcae44e069eeb42052f9481e
SHA256: 216920c82d0acad198e58a8ce97679b91c62e8ca878b13b635 58c9e7f61c2fe3
D.M.S-dm7020hd-OE2-v4.6_Images_Originale
http://i.imgur.com/r3IfSeR.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
D.M.S-dm7020hdv2-OE2-v4.6_Images_Originale
http://i.imgur.com/r3IfSeR.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
Re : Images dreambox 7020
Eurosat 2.0_Image_Originale_by_G-ogi
http://i64.tinypic.com/2a00rox.jpg
http://i.imgur.com/r3IfSeR.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
Dreambox Original Images__ Satdreamgr image v4.0-O.E. 2.0 dm 7020hd
Re : Images Dreambox DM7020HD
http://guidesghar.com/wp-content/upl...l-stamp-md.pngD.M.S-Img-dm7020hdv2-v5.9 https://s17.postimg.org/70ao807b3/bootlogo.jpg
D.M.S-image-dm7020hdv2-OE2-v5.9.nfi
Date: 2016-10-20 11:31
Enigma2: 3.999git20160616-r11.0
Distro: opendreambox 2.0.0
Machine: Dreambox dm7020hd
http://i32.servimg.com/u/f32/11/42/95/92/prst10.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
MD5: 0886744d7c504056b74b879dd7b51ba3
SHA256: 96b5848406a29ddea035996b6fd4c47f26172442a6c638066d ee27940bd5ddc5
Genuine image with the Last CVS
Creatori immagini
ANTRAG
-----------------------
Sviluppatore del blue panel
asanovich
--------------------
Beta tester
ANTRAG tonino1956
Skin Default Dreamy
-------------------------------------
many new updates Enigma2
-------------------------------------
potete scaricare i picon by mmark dal pannello demonisat
----------------------------------------------------------
Fix Driver Wlan
New Memory Info Thanks m43c0
New DynDNS Thanks m43c0
Aggiunto OpenVPN Thanks m43c0
You can download picon by mmark panel demonisat
New bootlogo demonisat
---------------------------------------------
queste images contengono solo 3 lingue
Italiano, inglese,Tedesco
potete scaricare la vostra lingua preferita dal pannello demonisat
if you want to download other plugins go
menu / plugin
Manage extensions
--------------------------------------------------------------------
these images contain only 3 languages
Italian English Deutsch
you can download your preferred language from the panel demonisat
Added language Brazilian downloaded from the panel demonisat
---===ooo0ooo===---
Raccomandiamo di non fare aggiornamento software
possibilmente mettere immagine in flash
si ringrazia gli autori dei vari plugin skin patch etc etc
------------------------------------------------------------
We recommend not to do software update
possibly to put image in flash
we thank the authors of the various plugins skin patches etc etc
----------------------------------
New Blue Panel demonisat
You'll find everything you need
for the operation of the image
to download from the panel demonisat put the DHCP automatically
About to more than one satellite is set to expert enable multiple bouquets
menu, settings, system, customize
set of expert
Per poter scaricare dal pannello demonisat dovete mettere il DHCP in Auto !!
impostare su esperto é abilitare multiple bouquet
menu,impostazioni,sistema,personalizzare
impostare su esperto
thanks to the authors of the various skin patch plugins etc etc !!
http://i32.servimg.com/u/f32/11/42/95/92/prst10.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
http://guidesghar.com/wp-content/upl...l-stamp-md.pngD.M.S-Img-dm7020hd-v5.9
https://s17.postimg.org/70ao807b3/bootlogo.jpg
D.M.S-image-dm7020hd-OE2-v5.9.nfi
Date: 2016-10-20 11:24
Enigma2: 3.999git20160616-r11.0
Distro: opendreambox 2.0.0
Machine: Dreambox dm7020hd
http://i32.servimg.com/u/f32/11/42/95/92/prst10.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
MD5: 974aca2a547b09a03f5446e988c5fa0f
SHA256: 602b26d0de8f9b3ff169445dab46f74b0462b07f53e730e39c f0a12fb0f2b3a9
http://i32.servimg.com/u/f32/11/42/95/92/prst10.gif
**Contenu caché: Cliquez sur Thanks pour afficher. **
Re : Images Dreambox DM 7020HD
bonsoir .j ai un dreambox 800 HD SE clone j ai une image Vu+ blackhole . Sur la page "accelerer Black Hole" tout est desactive alors le demo ne fait que rebooter puis page verte .quelqu un aurait une image a me proposer dans ce forum.merci.
Re : Images Dreambox DM 7020HD
Re : Images Dreambox DM 7020HD
bonjour et merci pour le image.