Affichage des résultats 1 à 9 sur 9
  1. #1
    Date d'inscription
    novembre 2013
    Messages
    37
    Thanks
    3
    Total, Thanks 21 fois
    Pouvoir de réputation
    0

    SR-1000HD (pas premium)

    bonjour et salamou alaikoum.. j ai recu un sr-1000hd .et svp je voudrai savoir s il ya une mise a jour pour la tnt ou une mise a jour pour mettre uncccam.. et quel version .. merci pour une reponse a tout le monde

  2. # ADS
    SR-1000HD   (pas premium)
    Ich'har Circuit publicitaire
    Date d'inscription
    Toujours
    Messages
    Plusieurs
     
  3. #2
    Date d'inscription
    juillet 2014
    Localisation
    ***********************
    Messages
    3 137
    Thanks
    2
    Total, Thanks 11 863 fois
    Pouvoir de réputation
    0

    Re : SR-1000HD (pas premium)

    Bonsoir Digital
    Voici la derniere MAJ:
    **Contenu caché: Cliquez sur Thanks pour afficher. **

    Faites f1 000 Pour activer les sharing
    Puis pour le cccam: Menu/Expansion/Network Application/Server Setting/Server Type/Cccam
    Ensuite compléter les 4 lignes
    - IP/URL
    - TCP Port
    - User Name
    - Password
    en pressant sur OK sur chaque ligne afin d'acceder au tableau alphanumerique et finissez à chaque fois par OK
    Enfin quand vous aurez remplit les 4 lignes sortir et mémoriser.
    Cordialement.
    Dernière modification par toonsi ; 16/08/2014 à 22h37.

  4. #3
    Date d'inscription
    juillet 2014
    Localisation
    ***********************
    Messages
    3 137
    Thanks
    2
    Total, Thanks 11 863 fois
    Pouvoir de réputation
    0

    Re : SR-1000HD (pas premium)

    Bonjour digital, je répond à ton message privé qui devra être poursuivi dans cette discussion pour plus d'éfficacité: "sabah ennour .. merci pour ta reponse .. voila .j ai fais une connerie . j ai mis a jour avec une version .et maintenant le me retrouve bloque avec la led vert et rouge .:au secours: de l aide .merci si tu as un dump et son loader et la marche a suivre ..merci merci merci"

    - Le Dump:
    **Contenu caché: Cliquez sur Thanks pour afficher. **

    - Le Loader:
    **Contenu caché: Cliquez sur Thanks pour afficher. **

    - La Methode:
    IMPORTANT, DEMO ETTEINT ELECTRIQUEMENT
    pour ce qui est de la méthode de la mise à jour par loader
    et celle ci prend du temps
    vous cliquer sur le loader en deux fois pour l'ouvrir puis vous cliquez sur update file pour choisir
    le fichier de la mise a jour et son emplacement
    en le trouvant vous cliquez sur et après sur ouvrir
    vous cliquez sur update + sur le bouton MENU
    qui est sur la façade du récepteur et allumer le de derriere
    et vous allez remarqué que le transfert démarre
    sur le loader et sur le récepteur
    Vous lachez le bouton menu de la façade à ce moment là
    et vous attendez à ce que le tranfert se termine
    et le récepteur affiche END
    Puis redemarre automatiquement.

  5. #4
    Date d'inscription
    novembre 2013
    Messages
    37
    Thanks
    3
    Total, Thanks 21 fois
    Pouvoir de réputation
    0

    Re : SR-1000HD (pas premium)

    merci a toi pour les fichiers .. j ai essaye plusieur fois la methode .mais rien de rien . toujours ..led rouge et vert .. merci .j ai bien suivi .mais rien . esqu il y a un autre moyen .. merci

  6. #5
    Date d'inscription
    juillet 2014
    Localisation
    ***********************
    Messages
    3 137
    Thanks
    2
    Total, Thanks 11 863 fois
    Pouvoir de réputation
    0

    Re : SR-1000HD (pas premium)

    Bonjour Digital, si tu ne peux pas le faire reparer et que tu n'as plus d'autres choix tu peux essayer un dernier moyen avec les risques que cela comporte: la methode HyperTerminal.
    Ce programme est présent dans windows jusqu'à XP, ensuite il faut le telecharger gratuitement sur le net ou bien là:
    **Contenu caché: Cliquez sur Thanks pour afficher. **

    Suis les 2 methodes suivantes:

    Methode A
    1_ Open Hbertrnimal program of

    2_ filling machine from fallow back Receiver
    3_ press at the same time on the three buttons of the keyboard
    Ruler & Shift & 2 at the same time with continued pressure and lift
    As the picture below
    Until a message appears
    STB225 v1 nand
    http://www5.0zz0.com/2011/12/24/11/835072982.png
    When the message appears as image advancing green
    We write the following command
    run menu
    Then we press Inter keyboard

    http://www12.0zz0.com/2011/12/24/11/898044890.png

    After pressing the Inter from the keyboard
    http://www11.0zz0.com/2011/12/24/11/967281870.png

    After pressing the Inter message appears above
    Please insert order
    No. 4, and then writes Inter
    http://www4.0zz0.com/2011/12/24/11/676260012.png
    After writing No. 4 and the pressure on Inter begin the process of organizing sizes and arrangement of the parts

    http://www13.0zz0.com/2011/12/24/11/152493994.png

    Now at this stage Put your device version put flashdisk
    And put the receiver and then restart the receiver from the back and leave fallow receiver the usual update process will return to work

    Methode B
    Instructions for the emergency: uboot new flashing alien1

    Instructions for the emergency: uboot new flashing


    There are increasing reports of users that shooting up the boot loader or corrupt, although this should be impossible due to read-only
    The box gets stuck in the episode at boot time (display: boot) no longer boots up, no matter if spark or Enigma.

    Normally, this is a case of warranty.
    You can save postage and time but by you yourself new overrides in case of emergency the submarine.

    Attention: only for users with some clue in matter > everyone else please the box send to repair!

    Instructions:
    What is needed?
    Null modem cable
    Hyper terminal program (Windows XP: start > Accessories > communications > HyperTerminal)
    Note: starting with Windows Vista, HT is no longer part of Windows, but there are freeware.

    Emergency-HowTo: override bootloader
    ==================================

    Use only in case of an emergency!

    -Switch off box, then connect to PC/laptop via null-modem cable (RS232)
    -Start HyperTerminal and create new connection
    -> select correct COM interface
    -> Bits per second: 115-200
    -> Flow control: no

    -Then transfer > Send file
    -Select correct uboot-xxx.bin
    -Log: Ymodem
    -Click send!

    > now before turning on the box!
    -When you turn hold button [OK] to [FORC] appears
    -then left arrow [<] press
    -RS232 appears on the display

    Now is the transmission, which should take about 2 minutes.
    Turn off not prematurely or other maneuvers at this stage!

    Flash at your own risk!

    Thx ans RSP-Team für den uboot-alien und an Dirk Tössfeld für den uboot-pingulux.


    Code:
    **Contenu caché: Cliquez sur Thanks pour afficher. **

    BON COURAGE!

    Dernière modification par toonsi ; 19/08/2014 à 20h09.

  7. #6
    Date d'inscription
    novembre 2013
    Messages
    37
    Thanks
    3
    Total, Thanks 21 fois
    Pouvoir de réputation
    0

    Re : SR-1000HD (pas premium)

    ssalam mes amis .je reviens vers vous . je brache hyperterminal . et voile ce qu il me donne . ce n ai vraiment pas comme les fichier que j ai recu ..merci pour une suite.....

    Board: STb7109e-ref




    U-Boot 1.1.2.GS02 (Dec 14 2009 - 18:37:16) - st2.0-14


    DRAM: 128 MB
    Flash: 16 MB
    In: serial
    Out: serial
    Err: serial
    UUU.## Booting image at a0040000 ...
    Image Name: “Linux 2.6
    Image Type: SH-4 Linux Kernel Image (gzip compressed)
    Data Size: 1935525 Bytes = 1.8 MB
    Load Address: 84501000
    Entry Point: 84502000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Image Name: 7109 ST40 Linux Ramdisk
    Image Type: SH-4 Linux RAMDisk Image (uncompressed)
    Data Size: 5723423 Bytes = 5.5 MB
    Load Address: 85900000
    Entry Point: 85900000
    Verifying Checksum ... OK
    Loading Ramdisk to 84a8a000, length 0057551f ... OK


    Starting kernel root=/dev/ram0 nwhwconf=device:eth0,hwaddr:00:FA:E0:FA:E0:00 stb
    7109eth=0,5000,1000 stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 ste101p=device:et
    h0,flowctrl:0 ip=192.168.115.242::192.168.115.1:255.255.255.0:ma rco:eth0ff ram
    disk_size=20480 rw mem=59m bigphysarea=2000 - 0x0058a000 - 5723423 ...

  8. #7
    Date d'inscription
    novembre 2013
    Messages
    37
    Thanks
    3
    Total, Thanks 21 fois
    Pouvoir de réputation
    0

    Re : SR-1000HD (pas premium)

    Citation Envoyé par digital001 Voir le message
    ssalam mes amis .je reviens vers vous . je brache hyperterminal . et voile ce qu il me donne . ce n ai vraiment pas comme les fichier que j ai recu ..merci pour une suite.....

    Board: STb7109e-ref




    U-Boot 1.1.2.GS02 (Dec 14 2009 - 18:37:16) - st2.0-14


    DRAM: 128 MB
    Flash: 16 MB
    In: serial
    Out: serial
    Err: serial
    UUU.## Booting image at a0040000 ...
    Image Name: “Linux 2.6
    Image Type: SH-4 Linux Kernel Image (gzip compressed)
    Data Size: 1935525 Bytes = 1.8 MB
    Load Address: 84501000
    Entry Point: 84502000
    Verifying Checksum ... OK
    Uncompressing Kernel Image ... OK
    Image Name: 7109 ST40 Linux Ramdisk
    Image Type: SH-4 Linux RAMDisk Image (uncompressed)
    Data Size: 5723423 Bytes = 5.5 MB
    Load Address: 85900000
    Entry Point: 85900000
    Verifying Checksum ... OK
    Loading Ramdisk to 84a8a000, length 0057551f ... OK


    Starting kernel root=/dev/ram0 nwhwconf=device:eth0,hwaddr:00:FA:E0:FA:E0:00 stb
    7109eth=0,5000,1000 stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 ste101p=device:et
    h0,flowctrl:0 ip=192.168.115.242::192.168.115.1:255.255.255.0:ma rco:eth0ff ram
    disk_size=20480 rw mem=59m bigphysarea=2000 - 0x0058a000 - 5723423 ...
    mon ami toonsi ..je reviens vers toi ..esqu il ya un moyen ou c est foutu ..merci

  9. #8
    Date d'inscription
    juillet 2014
    Localisation
    ***********************
    Messages
    3 137
    Thanks
    2
    Total, Thanks 11 863 fois
    Pouvoir de réputation
    0

    Re : SR-1000HD (pas premium)

    Bonsoir Digital,
    reessaies la methode du flashage avec loader du post du 18/08/14 à 3h25 avec le loader et dump que je t'avais indiqué dans ce post mais en veillant au moment de passer le dump: tu cliques sur UPDATE puis tu appuies et maintiens appuyé sur le bouton MENU sur l'avant du demo et tout en maintenant la pression sur le bouton MENU, tu allume electriquement le demo avec l'interrupteur à l'arriere du demo.
    Voilà un tuto en image:
    **Contenu caché: Cliquez sur Thanks pour afficher. **

    Sinon voici 2 autres dump à essayer:
    **Contenu caché: Cliquez sur Thanks pour afficher. **

    **Contenu caché: Cliquez sur Thanks pour afficher. **

  10. #9
    Date d'inscription
    mai 2015
    Messages
    1
    Thanks
    2
    Total, Thanks 0 fois
    Pouvoir de réputation
    0

    Re : SR-1000HD (pas premium)

    Thanks ....

    Thanks....... ......

Règles de messages

  • Vous ne pouvez pas créer de nouvelles discussions
  • Vous ne pouvez pas envoyer des réponses
  • Vous ne pouvez pas envoyer des pièces jointes
  • Vous ne pouvez pas modifier vos messages
  •