Page 1 sur 2 12 DernièreDernière
Affichage des résultats 1 à 10 sur 12
  1. #1
    Date d'inscription
    avril 2014
    Messages
    49
    Thanks
    11
    Total, Thanks 15 fois
    Pouvoir de réputation
    0

    configurazione oscam emu

    salve vorrei leggere srg e tandberg sui 39 est tramite softkey ma non riesco, ho anche una scheda tv sat e non viene vista...chi mi aiuta nella configurazione? questi sono i mie file:

    oscam.conf

    [global]
    logfile = /dev/tty
    clienttimeout = 4000
    clientmaxidle = 300
    netprio = 1
    nice = -1
    maxlogsize = 1000
    waitforcards = 0
    preferlocalcards = 1
    dropdups = 1


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    request_mode = 1
    user = linux
    read_sdt = 1
    write_sdt_prov = 1
    boxtype = dreambox
    extended_cw_api = 1


    [streamrelay]
    stream_relay_enabled = 0


    [webif]
    httpport = 8888
    httpshowmeminfo = 1
    httpshowuserinfo = 1
    httpshowcacheexinfo = 1
    httpshowecminfo = 1
    httpshowloadinfo = 1
    httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
    http_status_log = 1


    [newcamd]
    port = [email protected]
    key = 0102030405060708091011121314
    mgclient = 1
    keepalive = 1

    oscam.server


    [reader]
    label = Tvsat
    enable = 1
    protocol = internal
    Detect = CD
    emmcache = 1,2,2
    device = /dev/sci0
    group = 2
    caid = 0183D
    ident = 0183D:000000,005411
    rsakey =
    blockemm-s = 0
    blockemm-g = 1
    blockemm-unknown




    [reader]
    label = cccam_server1
    enable = 1
    protocol = cccam
    device = 192.168.0.254,12345
    user = a66
    password = b66
    inactivitytimeout = 20
    reconnecttimeout = 15
    group = 1
    cccversion = 2.2.1
    cccmaxhops = 2
    ccckeepalive = 1
    audisabled = 1

    oscam.user


    [account]
    description = dvbapi
    user = linux
    group = 1,2,3,4
    dm800 hd se, zgemma h5

  2. # ADS
    configurazione oscam emu
    Ich'har Circuit publicitaire
    Date d'inscription
    Toujours
    Messages
    Plusieurs
     
  3. #2
    Date d'inscription
    juillet 2015
    Messages
    2 062
    Thanks
    259
    Total, Thanks 1 695 fois
    Pouvoir de réputation
    94

    Re : configurazione oscam emu

    Prova la configurazione indicata da tro69 qui: http://www.maghreb-sat.com/forum/f12...tml#post435585 (post #295)
    Per leggere la scheda tivusat dovrai aggiungere a questo di tro69 il tuo [reader] Tvusat nel file oscam.server munito della rsakey che da te manca (fai sapere se ce l'hai).

    Se vuoi posso postarti la configurazione per doscam 0.25.
    Zgemma H7C e H7S - H5.2S plus - H2 Combo (openATV)




  4. #3
    Date d'inscription
    avril 2014
    Messages
    49
    Thanks
    11
    Total, Thanks 15 fois
    Pouvoir de réputation
    0

    Re : configurazione oscam emu

    aggiorno dicendo che ho luce sia su tvsat che su cline, ancora buio su emu come svizzeri e tandberg... chi mi aiuta? grazie

    posto la configurazione oscam server:

    [reader]
    label = oscam_emu
    protocol = emu
    device = emulator
    caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1, 1010
    detect = cd
    ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4 ,0000A8;090F:000000;0500:000000,030B00,023800,0211 10,007400,007800;1801:000000,001101;0604:000000;26 00:000000;FFFF:000000;0E00:000000;4AE1:000000;1010 :000000
    group = 1
    blockemm-g = 1


    [reader]
    label = SoftCam.Key
    protocol = constcw
    device = /etc/tuxbox/config/SoftCam.Key
    caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1, 1010
    detect = cd
    ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000;1010:000000
    group = 2


    [reader]
    label = constant.cw
    protocol = constcw
    device = /etc/tuxbox/config/constant.cw
    caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1, 1010
    detect = cd
    ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000;1010:000000
    group = 3


    [reader]
    label = oscam.keys
    protocol = constcw
    device = /etc/tuxbox/config/oscam.keys
    caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1, 1010
    detect = cd
    ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000;1010:000000
    group = 4


    [reader]
    label = oscam.constant.cw
    protocol = constcw
    device = /etc/tuxbox/config/oscam.constant.cw
    caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1, 1010
    detect = cd
    ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;09 0F:000000; 0500:000000,030B00,023800,021110,007400,007800;180 1:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0 E00:000000 ;4AE1:000000;1010:000000
    group = 5


    [reader]
    label = CCcam1
    description = none
    protocol = cccam
    device = xxx
    user = xxx
    password = xxxx
    group = 1
    cccversion = 2.1.4


    [reader]
    label = CCcam2
    description = none
    protocol = xxx
    device = none
    user = xxx
    password = xxx
    group = 1
    cccversion = 2.1.4


    [reader]
    label = cccam3
    description = none
    protocol = xxxxx
    device = none
    user = xxxx
    password = xxxx
    group = 1
    cccversion = 2.1.4

    [reader]
    label = Newcamd
    description = Newcamd Example
    protocol = newcamd
    device = server,port
    key = 0102030405060708091011121314
    user = username
    password = password
    group = 1


    [reader]
    label = Camd3
    protocol = camd35
    device = server,port
    user = user
    password = pass
    group = 1




    [reader]
    label = tvsat
    protocol = internal
    device = /dev/sci0
    autospeed = 0
    caid = 183D
    rsakey = xxxx
    ecmnotfoundlimit = 500
    detect = cd
    mhz = 540
    cardmhz = 2700
    group = 2
    blockemm-unknown = 1
    blockemm-g = 1
    ratelimitecm = 100
    ratelimittime = 4000
    srvidholdtime = 1000
    Dernière modification par rickardsat ; 25/04/2017 à 22h43.
    dm800 hd se, zgemma h5

  5. #4
    Date d'inscription
    juillet 2015
    Messages
    2 062
    Thanks
    259
    Total, Thanks 1 695 fois
    Pouvoir de réputation
    94

    Re : configurazione oscam emu

    Rick, nascondi subito con delle xxx gli user e passw delle tue cline (se sono quelle vere) altrimenti altri te le possono copiare e di conseguenza il server le bloccherà trovando diversi utenti collegati alla stessa cline.
    Zgemma H7C e H7S - H5.2S plus - H2 Combo (openATV)




  6. #5
    Date d'inscription
    avril 2014
    Messages
    49
    Thanks
    11
    Total, Thanks 15 fois
    Pouvoir de réputation
    0

    Re : configurazione oscam emu

    grazie!! non riesco a capire per quale motivo non aggancia l'emu
    dm800 hd se, zgemma h5

  7. #6
    Date d'inscription
    juillet 2015
    Messages
    2 062
    Thanks
    259
    Total, Thanks 1 695 fois
    Pouvoir de réputation
    94

    Re : configurazione oscam emu

    Citation Envoyé par rickardsat Voir le message
    grazie!! non riesco a capire per quale motivo non aggancia l'emu
    Non ti ho risposto perché con oscam non ho testato direttamente gli svizzeri, se vuoi posso indicarti per fare tutto con doscam 0.25 (svizzeri+ tivusat+ cline) devi solo installare la doscam 0.25, la oscam che hai ora puoi lasciarla così com'è, nell'eventualità se non è attiva non crea conflitti.
    Zgemma H7C e H7S - H5.2S plus - H2 Combo (openATV)




  8. #7
    Date d'inscription
    avril 2014
    Messages
    49
    Thanks
    11
    Total, Thanks 15 fois
    Pouvoir de réputation
    0

    Re : configurazione oscam emu

    ti ringrazio ma doscam grazie all'iuto dell post sono riuscito a configurarlo bene!! ora ho scoperto che questa cam non supporta l emu sui 39est e quindi volevo provare con oscam emu
    dm800 hd se, zgemma h5

  9. #8
    Date d'inscription
    mars 2015
    Messages
    1 623
    Thanks
    13
    Total, Thanks 1 598 fois
    Pouvoir de réputation
    97

    Re: configurazione oscam emu

    Ma hai scaricato osemu? è in funzione?

  10. #9
    Date d'inscription
    avril 2014
    Messages
    49
    Thanks
    11
    Total, Thanks 15 fois
    Pouvoir de réputation
    0

    Re : Re: configurazione oscam emu

    Citation Envoyé par tro69 Voir le message
    Ma hai scaricato osemu? è in funzione?
    si tutto ok ho risolto era la versione di osemu che dava problemi!

    per completezza riporo la mia configurazione funzionante:

    oscam.conf

    Code:
    [global]
    logfile = /tmp/oscam.log
    nice = -1
    maxlogsize = 200
    preferlocalcards = 1
    
    
    [dvbapi]
    enabled = 1
    pmt_mode = 1
    user = linuxsatsupport
    
    
    
    
    [webif]
    httpport = 16402
    httptpl = /etc/tuxbox/config/tpl/
    httprefresh = 30
    httpshowmeminfo = 1
    httpshowuserinfo = 1
    httpshowcacheexinfo = 1
    httpshowecminfo = 1
    httpshowloadinfo = 1
    httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
    http_status_log = 1
    oscam.server

    Code:
    [reader]
    label = oscam_emu
    protocol = emu
    device = emulator
    caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
    detect = cd
    ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
    group = 1
    blockemm-g = 1
    
    
    [reader]
    label = tvsat
    protocol = internal
    device = /dev/sci0
    autospeed = 0
    caid = 183D
    rsakey = xxx
    ecmnotfoundlimit = 500
    detect = cd
    mhz = 540
    cardmhz = 2700
    group = 2
    blockemm-unknown = 1
    blockemm-g = 1
    ratelimitecm = 100
    ratelimittime = 4000
    srvidholdtime = 1000
    
    
    [reader]
    label = server1
    protocol = cccam
    device =xxxx,xxx
    user = xxx
    password = xxx
    inactivitytimeout = 30
    group = 1
    cccversion = 2.0.11
    cccmaxhops = 3
    ccckeepalive = 1
    audisabled = 1
    
    
    [reader]
    label = server2
    protocol = cccam
    device =xxx,xxx
    user = xxx
    password = xxx
    inactivitytimeout = 30
    group = 1
    cccversion = 2.0.11
    cccmaxhops = 3
    ccckeepalive = 1
    audisabled = 1
    
    
    [reader]
    label = server3
    protocol = cccam
    device = xxx,xxx
    user = xxx
    password = xxx
    inactivitytimeout = 30
    group = 1
    cccversion = 2.0.11
    cccmaxhops = 3
    ccckeepalive = 1
    audisabled = 1
    oscam.user

    Code:
    [account]
    user = linuxsatsupport
    monlevel = 1
    keepalive = 1
    group = 1
    cccmaxhops = 3

    ps: ho usato la "softcam-camd-oscam-emu_11.306-FOR-OpenPli"
    Dernière modification par rickardsat ; 28/04/2017 à 09h09.
    dm800 hd se, zgemma h5

  11. #10
    Date d'inscription
    avril 2014
    Messages
    49
    Thanks
    11
    Total, Thanks 15 fois
    Pouvoir de réputation
    0

    Re: configurazione oscam emu

    per quanto riguarda le constant.cw e le biss key come procedo? devo fare qualche modifica?? fatemi sapere grazie
    dm800 hd se, zgemma h5

Page 1 sur 2 12 DernièreDernière

Règles de messages

  • Vous ne pouvez pas créer de nouvelles discussions
  • Vous ne pouvez pas envoyer des réponses
  • Vous ne pouvez pas envoyer des pièces jointes
  • Vous ne pouvez pas modifier vos messages
  •