Affichage des résultats 1 à 2 sur 2
  1. #1
    Date d'inscription
    juin 2014
    Localisation
    Tunisie
    Messages
    111
    Thanks
    10
    Total, Thanks 223 fois
    Pouvoir de réputation
    120

    NCam_1.2-r3prismicube_BHP

    cam work 100/100


    ############################ #############

    ************************************************** ********** ************
    Important notice !!

    This is the OFFICIAL version (20.3.2017)
    There are no later versions.

    If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
    Be very careful when downloading non-OFFICIAL versions,
    we are not responsible for those versions or what their authors may have added.

    Signed: Javier Sayago (Javilonas)
    ************************************************** ********** ************

    Compiled:

    ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
    ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
    ncam.x86 Linux PC (32 bit - i686).
    ncam.x86_64 Linux PC (64 bit).
    ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
    ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
    ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
    ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek Play and similar).
    ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
    ncam-router.mips Routers (Routers MIPSEL DD-WRT).
    ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

    ************************************************** ********** ************

    Ncam settings web::

    Ncam Admin Control:
    Control Panel - Login
    (192.168.x.x)
    user: root
    password: ldteam

    Config: /var/tuxbox/config
    SoftCam.Key: /var/tuxbox/config

    SoftCam.Key Not included!!


    ************************************************** ********** ************

    Changelog v1.2-r3:

    - Fix Cuts every 10 seconds and pixelations for CAIDs 09C4 and 098C.




    juste extraire and send prismicube_bhp with dcc and chmod 755
    a change ncam.sh camscript ans unistal its work after rebbot good luck
    cam work 100/100


    ############################ #############

    ************************************************** ********** ************
    Important notice !!

    This is the OFFICIAL version (20.3.2017)
    There are no later versions.

    If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
    Be very careful when downloading non-OFFICIAL versions,
    we are not responsible for those versions or what their authors may have added.

    Signed: Javier Sayago (Javilonas)
    ************************************************** ********** ************

    Compiled:

    ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
    ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
    ncam.x86 Linux PC (32 bit - i686).
    ncam.x86_64 Linux PC (64 bit).
    ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
    ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
    ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
    ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek Play and similar).
    ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
    ncam-router.mips Routers (Routers MIPSEL DD-WRT).
    ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

    ************************************************** ********** ************

    Ncam settings web::

    Ncam Admin Control:
    Control Panel - Login
    (192.168.x.x)
    user: root
    password: ldteam

    Config: /var/tuxbox/config
    SoftCam.Key: /var/tuxbox/config

    SoftCam.Key Not included!!


    ************************************************** ********** ************

    Changelog v1.2-r3:

    - Fix Cuts every 10 seconds and pixelations for CAIDs 09C4 and 098C.




    juste extraire and send prismicube_bhp with dcc and chmod 755
    a change ncam.sh camscript ans unistal its work after rebbot good luck
    Fichiers attachés Fichiers attachés

  2. # ADS
    NCam_1.2-r3prismicube_BHP
    Ich'har Circuit publicitaire
    Date d'inscription
    Toujours
    Localisation
    Monde des annonces
    Messages
    Plusieurs
     
  3. #2
    Date d'inscription
    février 2015
    Messages
    378
    Thanks
    115
    Total, Thanks 1 624 fois
    Pouvoir de réputation
    111

    Re : NCam_1.2-r3prismicube_BHP

    ZARDOZE LE MAGNEFIQUE

    Iptv avec enigma2 sur l'image Blackhole
    Mon debit est variable entre 10mo et 35mo
    Vu+ Duo2 - DreamBox 800 SE HD OFF - ATLAS 100 HD
    Une Télé Sony 65X8500 BB

Règles de messages

  • Vous ne pouvez pas créer de nouvelles discussions
  • Vous ne pouvez pas envoyer des réponses
  • Vous ne pouvez pas envoyer des pièces jointes
  • Vous ne pouvez pas modifier vos messages
  •