robijay
21/04/2015, 08h59
16310
EGAMI 6.6.5
Fix MovieSelection Crash
Fix Stop and Relete recoriding
Fix backup MINI+
Fix rotor position in infobar for motorized tuner. thx Dimitrij
Fix SCOPE_SKIN_IMAGE, when SCOPE_CURRENT_SKIN is not successful in skin.py. Thanks betacentauri
Fix CronTimers BSoD.
Fix GSOD for instant recording when is for Change recording (duration) input empty
Add support for BlackWidow-X Series
Add EGAMI system speed up
Add option to parental lock manufacturer reset and software update screens
Add OWI load on start
Add Capability to remove notifiers from configs
add Change recording (add time) to instant recording. It adds time to end of recording
Add tar.Gz install by MediaScanner
Add Norwegian language
Add Osd transparency
Add functionality to get the service reference flags
Add flag to services so we can mark services as dedicated 3D
Add extra inactvity detection block timer
[VideoMode] reverse some code as it breaks several lines and forces to read driver and not fall back to e2 code.
[VideoMode] fix possible GS "multi" now also switches to 24Hz
[MovieSelection] fix posible BSoD.
MovieList: .asf extension could also be a video stream/extension
Also make it possible to (un)hide parental locked recordings
ScanSetup - Predefined transponder - added system option (dvb-t/t2) for scan
Simplify parental locked movie list and playing movie when coming from standby
Close movieselection when go to standby and we're in a protected dir
Always reload to home folder when a parental locked list is selected
ParentalControl: Simplify some code
Correctly cache pincode when entering parental protected directory
PlayList adapted for FullHD skin
Do check on service pin active instead of pin not equal 0000
Solve GSOD when movieselection is parentally protected.
[VideoMode] add missing imports.
[InfoBar] remove unused variable.
[VideoMode] add missing import.
[mytest] Init OSD before AV, as it's required for 3D autoswitch.
[ButtonSetup]: add Skin selector, tweak some text
[InfoBarGeneretics.py] when IB is dimmed will transparency sometimes … …not reset
[NetworkSetup] remove Debug.
[OnlineUpdateCheck] fix and cleanup feed status code.
[OnlineUpdateCheck] add support for detecting no network cable.
SoftwareUpdate: Do not show update options when no updates are available
SoftwareUpdate: Do not quit when no updates are available
SoftwareUpdate: Add option to show latest opkg upgrade log
SoftwareUpdate: network status cleanup.
[TimerEntry] hide option 'Add End Time' for ZAP timer, as ZAP timer should be used as a reminder that event has started, and thus should not have a end time.
When movielist is parental locked revert to default movielist
Do not parental protect the .Trash directories
When parental control is disabled no service is protected
Remove a not required variable declaration
Also avoid unpause of recording from parental protected service
ParentalControl: Add function isProtected
Not continue playing parental protected mkv etc.. when coming from standby
InputBox: do nothing with keyRight when enterring pin codes
Make it also possible to protect screens via Hotkey
MovieSelection: Parental protect "hiden" subdirectories
Correctly parental protect time edit menu
ChannelSelection: Small improvement regarding history zap
ChannelSelection: Add option to (un)mark services as dedicated 3D
ChannelSelection: Only show (un)mark dedicated 3D if box supports 3D
ParentalControl: Add possibility to parental protect recordings
InfoBar: Do not open MoviePlayer when parental locked recording is blocked
Hotkey: Add skin selection screen to hotkeyfunctions
RotorPosition converter - optimization for the type "TunerName" and nimConfig "advanced" by Dimitrij
Rotorposition - display parameters moved into menu
Do not check for 3D when we an internet stream
Sevaral changes regarding auto 3D settings
Use systeminfo to detect if 3D procs are available for a specific box
Simplify some code around applySettings in OSD3DSetup
Pig: Tiny performance improvement
Solve forgotton self.infoBarInstance in Standby.py
EventName: add missing attributes
PDC - possible display with pixmap, added posibility display running status for nex/now events
Update CS
Updated FR
Updated PL
Update DE
Update NL
Update Finnish
Update Latvian
GMEPG - added skin parameters RecIconSize, IconXPadding, IconYPadding for FullHD skins and timers icons, used MultiContentEntryPixmapAlphaBlend for timers icons
Instant recordings - confirmation for Stop (and delete) for recording
Standby: Solve GSOD when standby is selected from standby menu
OSD3DSetup: Do not switch to 3D when 3D mode is unknown
OSD3DSetup: Only write to the procs when it is really required
OSD3DSetup: avoid crash by defining a screen
OSD3DSetup: Add autoswitch to 3D when service is flagged as 3D
OSD3DSetup: Remove not required lines of code
OSD3DSetup: Correctly respond on changing mode when service isDedicated3D
OSD3DSetup: remove not required import
**Hidden Content: Check the thread to see hidden data.**
EGAMI 6.6.5
Fix MovieSelection Crash
Fix Stop and Relete recoriding
Fix backup MINI+
Fix rotor position in infobar for motorized tuner. thx Dimitrij
Fix SCOPE_SKIN_IMAGE, when SCOPE_CURRENT_SKIN is not successful in skin.py. Thanks betacentauri
Fix CronTimers BSoD.
Fix GSOD for instant recording when is for Change recording (duration) input empty
Add support for BlackWidow-X Series
Add EGAMI system speed up
Add option to parental lock manufacturer reset and software update screens
Add OWI load on start
Add Capability to remove notifiers from configs
add Change recording (add time) to instant recording. It adds time to end of recording
Add tar.Gz install by MediaScanner
Add Norwegian language
Add Osd transparency
Add functionality to get the service reference flags
Add flag to services so we can mark services as dedicated 3D
Add extra inactvity detection block timer
[VideoMode] reverse some code as it breaks several lines and forces to read driver and not fall back to e2 code.
[VideoMode] fix possible GS "multi" now also switches to 24Hz
[MovieSelection] fix posible BSoD.
MovieList: .asf extension could also be a video stream/extension
Also make it possible to (un)hide parental locked recordings
ScanSetup - Predefined transponder - added system option (dvb-t/t2) for scan
Simplify parental locked movie list and playing movie when coming from standby
Close movieselection when go to standby and we're in a protected dir
Always reload to home folder when a parental locked list is selected
ParentalControl: Simplify some code
Correctly cache pincode when entering parental protected directory
PlayList adapted for FullHD skin
Do check on service pin active instead of pin not equal 0000
Solve GSOD when movieselection is parentally protected.
[VideoMode] add missing imports.
[InfoBar] remove unused variable.
[VideoMode] add missing import.
[mytest] Init OSD before AV, as it's required for 3D autoswitch.
[ButtonSetup]: add Skin selector, tweak some text
[InfoBarGeneretics.py] when IB is dimmed will transparency sometimes … …not reset
[NetworkSetup] remove Debug.
[OnlineUpdateCheck] fix and cleanup feed status code.
[OnlineUpdateCheck] add support for detecting no network cable.
SoftwareUpdate: Do not show update options when no updates are available
SoftwareUpdate: Do not quit when no updates are available
SoftwareUpdate: Add option to show latest opkg upgrade log
SoftwareUpdate: network status cleanup.
[TimerEntry] hide option 'Add End Time' for ZAP timer, as ZAP timer should be used as a reminder that event has started, and thus should not have a end time.
When movielist is parental locked revert to default movielist
Do not parental protect the .Trash directories
When parental control is disabled no service is protected
Remove a not required variable declaration
Also avoid unpause of recording from parental protected service
ParentalControl: Add function isProtected
Not continue playing parental protected mkv etc.. when coming from standby
InputBox: do nothing with keyRight when enterring pin codes
Make it also possible to protect screens via Hotkey
MovieSelection: Parental protect "hiden" subdirectories
Correctly parental protect time edit menu
ChannelSelection: Small improvement regarding history zap
ChannelSelection: Add option to (un)mark services as dedicated 3D
ChannelSelection: Only show (un)mark dedicated 3D if box supports 3D
ParentalControl: Add possibility to parental protect recordings
InfoBar: Do not open MoviePlayer when parental locked recording is blocked
Hotkey: Add skin selection screen to hotkeyfunctions
RotorPosition converter - optimization for the type "TunerName" and nimConfig "advanced" by Dimitrij
Rotorposition - display parameters moved into menu
Do not check for 3D when we an internet stream
Sevaral changes regarding auto 3D settings
Use systeminfo to detect if 3D procs are available for a specific box
Simplify some code around applySettings in OSD3DSetup
Pig: Tiny performance improvement
Solve forgotton self.infoBarInstance in Standby.py
EventName: add missing attributes
PDC - possible display with pixmap, added posibility display running status for nex/now events
Update CS
Updated FR
Updated PL
Update DE
Update NL
Update Finnish
Update Latvian
GMEPG - added skin parameters RecIconSize, IconXPadding, IconYPadding for FullHD skins and timers icons, used MultiContentEntryPixmapAlphaBlend for timers icons
Instant recordings - confirmation for Stop (and delete) for recording
Standby: Solve GSOD when standby is selected from standby menu
OSD3DSetup: Do not switch to 3D when 3D mode is unknown
OSD3DSetup: Only write to the procs when it is really required
OSD3DSetup: avoid crash by defining a screen
OSD3DSetup: Add autoswitch to 3D when service is flagged as 3D
OSD3DSetup: Remove not required lines of code
OSD3DSetup: Correctly respond on changing mode when service isDedicated3D
OSD3DSetup: remove not required import
**Hidden Content: Check the thread to see hidden data.**