darvador2002
23/02/2014, 17h14
[SIZE=3][FONT=comic sans ms]################################################## ###################
Newnigma2 team proudly presents:
Newnigma2 v4.0.9
################################################## ###################
Basics:
Enigma2 4.0: 19.02.2014
Enigma2 Plugins: 24.02.2014
Newnigma2 Plugins: 24.02.2014
DM 500 HD
driver: 28.12.2013
secondstage: 84
kernel: 3.2.54
DM 500 HD v2
driver: 28.12.2013
secondstage: 88
kernel: 3.2.54
DM 800 HD PVR
driver: 28.12.2013
secondstage: 84
kernel: 2.6.18
DM 800 HD se
driver: 28.12.2013
secondstage: 84
kernel 3.2.54
DM 800 HD se v2
driver: 28.12.2013
secondstage: 88
kernel 3.2.54
DM 7020 HD
driver: 28.12.2013
secondstage: 88
kernel 3.2.54
DM 8000 HD PVR
driver: 28.12.2013
secondstage: 84
kernel: 3.2.54
changelog E2 19.02.2014:
finally fixed baltic teletext subtitles
added usage config entry to switch back to old teletext subtitle charset selection
some small changes to improve list displaying with hd skins (thanks to zombi)
changelog E2 14.02.2014:
small mediaplayer position query fix
fixed memory leak on ts streaming from network sources
dont lookup other transponder SDT during service scan by default, add a (expert) config option to reenable it
(imho its needed for dish network scan only... but breaks service descriptions on some other satellites)
fixed possible crash on enigma2 shutdown/restart
teletext subtitles changes by Arvo Järve (thanks for that!)
add fallback handling to detect subtitle language for providers which not correctly implement the national option subset in the page header
(fixes subtiles on some baltic countries)
added cyrillic charsets
(e.g. fixes teletext subtitles on russian services)
new skin option: progress_pointer
changelog E2 18.11.2013:
fixed greenscreen on cancel press during service/marker/bouquet rename
fixed a possible crash caused by plugins which doesn't check the return code of startTimeQuery..
fixed possible crash on screen close
fixed broken "ImageDefaultInstaller" (broken since 20131112 update)
fixed possible ConfigLocations crash (typo)
Notice: Update from v4.0.x to 4.0.9 possible.
Changes:
Added: Skin Evolution-HD by Kerni (thx)
Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
Added: Kerni.Gnome-HD by Kerni (thx)
Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
Added: mediaportal
Added: swapmanager
Added: wget
Added: stat
Added: weathercomponent (needed for some skins)
Added: eventposition (needed for some skins)
Added: reftopiconname (needed for some skins)
Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
Added: Black-Box.HD.ME (32bit skin)
Added: cryptsetup more information
Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
Added: free space check's before installing or upgrade packages
Added: min free flash space is 3mb for installing/upgrading some packages
Added: improve network connectivity check in newnigma2 installer
Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
Bugfix: neutrino keymap
Bugfix: newnigma2.Kerni.PanTV-HD icons
Bugfix: Caid Renderer didn't close ecm.info and share.info properly
Bugfix: for loading wrong or no newnigma2 service menu png's
Bugfix: loosing picon value in servicelist after using configsaver
Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
Update: Some improvements on our onlineinstaller
Update: znc to version 1.2
Update: openvpn to version 2.3.2
Update: german translation
Update: mediaportal to version 5.1.X
Update: added weatherfunction only for newnigma2-HD inforbar
(blue button -> newnigma2 services -> osd function -> weather infobar -> on)
Update: picon renderer. create piconSList dir for servicelist picons.
Removed: we have removed non working plugins. most of them are integrated in mediaportal.
Removed: keymanger plugin from image. It's still available from our feed.
release changes from 4.0.0 to 4.0.7
here u can find USB to UART driver
here u can find DreamUP V1.3.3.11
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.9:
if you have troubles by upgrading to v4.0.9 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".
Wichtige Änderungen:
1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"
2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.
3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!
4. Bei Problemen mit dem Update auf v4.0.9:
Sollte das Update auf v4.0.9 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.
Your
Newnigma2 Team
.: newnigma2 Board :.
**Hidden Content: Check the thread to see hidden data.**
Newnigma2 team proudly presents:
Newnigma2 v4.0.9
################################################## ###################
Basics:
Enigma2 4.0: 19.02.2014
Enigma2 Plugins: 24.02.2014
Newnigma2 Plugins: 24.02.2014
DM 500 HD
driver: 28.12.2013
secondstage: 84
kernel: 3.2.54
DM 500 HD v2
driver: 28.12.2013
secondstage: 88
kernel: 3.2.54
DM 800 HD PVR
driver: 28.12.2013
secondstage: 84
kernel: 2.6.18
DM 800 HD se
driver: 28.12.2013
secondstage: 84
kernel 3.2.54
DM 800 HD se v2
driver: 28.12.2013
secondstage: 88
kernel 3.2.54
DM 7020 HD
driver: 28.12.2013
secondstage: 88
kernel 3.2.54
DM 8000 HD PVR
driver: 28.12.2013
secondstage: 84
kernel: 3.2.54
changelog E2 19.02.2014:
finally fixed baltic teletext subtitles
added usage config entry to switch back to old teletext subtitle charset selection
some small changes to improve list displaying with hd skins (thanks to zombi)
changelog E2 14.02.2014:
small mediaplayer position query fix
fixed memory leak on ts streaming from network sources
dont lookup other transponder SDT during service scan by default, add a (expert) config option to reenable it
(imho its needed for dish network scan only... but breaks service descriptions on some other satellites)
fixed possible crash on enigma2 shutdown/restart
teletext subtitles changes by Arvo Järve (thanks for that!)
add fallback handling to detect subtitle language for providers which not correctly implement the national option subset in the page header
(fixes subtiles on some baltic countries)
added cyrillic charsets
(e.g. fixes teletext subtitles on russian services)
new skin option: progress_pointer
changelog E2 18.11.2013:
fixed greenscreen on cancel press during service/marker/bouquet rename
fixed a possible crash caused by plugins which doesn't check the return code of startTimeQuery..
fixed possible crash on screen close
fixed broken "ImageDefaultInstaller" (broken since 20131112 update)
fixed possible ConfigLocations crash (typo)
Notice: Update from v4.0.x to 4.0.9 possible.
Changes:
Added: Skin Evolution-HD by Kerni (thx)
Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
Added: Kerni.Gnome-HD by Kerni (thx)
Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
Added: mediaportal
Added: swapmanager
Added: wget
Added: stat
Added: weathercomponent (needed for some skins)
Added: eventposition (needed for some skins)
Added: reftopiconname (needed for some skins)
Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
Added: Black-Box.HD.ME (32bit skin)
Added: cryptsetup more information
Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
Added: free space check's before installing or upgrade packages
Added: min free flash space is 3mb for installing/upgrading some packages
Added: improve network connectivity check in newnigma2 installer
Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
Bugfix: neutrino keymap
Bugfix: newnigma2.Kerni.PanTV-HD icons
Bugfix: Caid Renderer didn't close ecm.info and share.info properly
Bugfix: for loading wrong or no newnigma2 service menu png's
Bugfix: loosing picon value in servicelist after using configsaver
Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
Update: Some improvements on our onlineinstaller
Update: znc to version 1.2
Update: openvpn to version 2.3.2
Update: german translation
Update: mediaportal to version 5.1.X
Update: added weatherfunction only for newnigma2-HD inforbar
(blue button -> newnigma2 services -> osd function -> weather infobar -> on)
Update: picon renderer. create piconSList dir for servicelist picons.
Removed: we have removed non working plugins. most of them are integrated in mediaportal.
Removed: keymanger plugin from image. It's still available from our feed.
release changes from 4.0.0 to 4.0.7
here u can find USB to UART driver
here u can find DreamUP V1.3.3.11
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.9:
if you have troubles by upgrading to v4.0.9 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".
Wichtige Änderungen:
1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
"blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"
2. Netzwerk Konfiguration:
"Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.
3. Installation oder Update des System:
Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
Sollte das nicht der Fall sein, bricht die Installation ab.
!!Achtung das enigma2 Paket benötigt min 9MB!!
4. Bei Problemen mit dem Update auf v4.0.9:
Sollte das Update auf v4.0.9 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
"blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.
Your
Newnigma2 Team
.: newnigma2 Board :.
**Hidden Content: Check the thread to see hidden data.**