PDA

Voir la version complète : Comment configurer mgcamd 1.35d pour le fichier mg_cfg



kabyliano5900
14/02/2013, 00h15
BONSOIR QUI PEUX M AIDER POUR CONFIGURE MON FICHIER SVP POUR MGCAM JAR IVE PAS A METTRE G:32 DESU QUI PEU ME LE FAIRE ET ME L 'ENVOILER PAR PRIVE POUR MÈTRE MON CCCAM DESSUS EN MGCAMD MERCI!http://www.maghreb-sat.com/forum/images/smile/TT%20TT%20%28Copier%29.png

jai teste avec les cline free mes jarive pas je les fait aussi comme sa ajouter G: { 32 } sur mg_cfg et toujour rien jai une dreambox 800 hd pvr l'image newnigma2

Après installer mgcamd aller à var/keys, vous trouver les fichiers suivants:


1 - cccamd.list pour les cline cccam

2- mg_cfg: Le fichier de configuration, On peut éditer comme suit :

G: { 32 } Seulement CCCAM

mon mg cfg a moi ces sa

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 01 }

freeman01
14/02/2013, 00h37
Salut

Tu peux editer le mg_cfg avec le DCC E2 ou bien notepad.

La Cline tu la copie dans cccamd.list ,comme tu fait dans cccam.cfg.


je prefère la mgcamd 1.38 ,,plus stable


Bonne reussite

ronand29
14/02/2013, 09h51
BONSOIR QUI PEUX M AIDER POUR CONFIGURE MON FICHIER SVP POUR MGCAM JAR IVE PAS A METTRE G:32 DESU QUI PEU ME LE FAIRE ET ME L 'ENVOILER PAR PRIVE POUR MÈTRE MON CCCAM DESSUS EN MGCAMD MERCI!http://www.maghreb-sat.com/forum/images/smile/TT%20TT%20%28Copier%29.png



Salut ci-joint ma config mgcamd.

Par contre je préfère te prévenir, le zapping est hyper lent (avec ou sans priority list) et en mgcamd 1.35 ou 1.38.

Du coup je suis repassé en CCcam

Bon courage ;)

kabyliano5900
14/02/2013, 10h47
ok merci pour votre aide je vai teste sa! voir si sa marche!

dkhhas
17/03/2013, 09h00
Salut ci-joint ma config mgcamd.

Par contre je préfère te prévenir, le zapping est hyper lent (avec ou sans priority list) et en mgcamd 1.35 ou 1.38.

Du coup je suis repassé en CCcam

Bon courage ;)

Bonjour ,

Je confirme les propos de ronand29.
Malgré ce que l'on dit sur le forum, le zapping en mgcamd (1.35 ou 1.38 ) n'est pas meilleur et même pire qu'en cccam.
je les ai tous essayé et suis revenu sur cccam pour un zapping presque immédiat.Malgré quelques freezes de temps en temps.

Courage

Mimiche
22/02/2015, 17h18
merci mais il faut changer la valeur comme ca G: { 33 } pour marcher cccam+mgcamd

Bonsoir

Prière de vous présentés comme l'indique le règlement du forum et c'est par la : Présentations des Membres (http://www.maghreb-sat.com/forum/f94/)

Merci de respecter les règles du forum.

Cdlt