DM800HD ne reboot plus

[zatanael]

Bonjour,

Je rencontre un petit problème :

Depuis peu, il m'est impossible de rebooter ma dm800 depuis le GUI.
Lorsque je fait redémarrer ou éteindre depuis le menu ça commence à se couper j'ai l'engrenage pendant un instant dans le coin de l'écran est puis plus rien, comme si elle attendait la fermeture d'un service.
J'ai essayé en remettant le skin par défaut sans plus résultat.

En revanche, lorsque j'envois une demande de reboot via telnet ça fonctionne sans accro.

La dream ne génère même pas de fichier de crash, je ne sais pas par où commencer...

Quelqu'un aurait-il une idée de se qui cause le problème ?

Je suis sous IHAD ICVS (Gemini 0.54-R1) du 24/03/2011

Merci

[moonstick]

Bonjour,

Tu n'as rien fait dessus récemment? Genre rajouter un disque dur ou autre?

[zatanael]

Non, rien de particulier, j'ai même fait un backup de ma clef usb et testé avec une autre.

Je m'en suis aperçu car j'ai planifié un reboot journalier avec crossepg, j'ai désinstallé celui-ci mais ce n'était pas la cause.

[zatanael]

Re

Quelqu'un pourrait-il me communiquez la liste des symlink présents dans le dossier /sbin pour les commandes "reboot" et "poweroff" ?

Merci d'avance

[zatanael]

un petit up,

j'ai vidé le fichier de log avant de lancer unn redémarrage depuis le gui voici le détail :

Jan 1 01:00:41 dm800 syslog.info syslogd started: BusyBox v1.15.3
Jan 1 01:00:41 dm800 user.warn kernel: [4294669.673000] - Resetting at b0480508
Jan 1 01:00:41 dm800 user.warn kernel: [4294669.673000] <-- brcm_start_hc
Jan 1 01:00:41 dm800 user.info kernel: [4294669.673000] brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
Jan 1 01:00:41 dm800 user.info kernel: [4294669.673000] brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 3
Jan 1 01:00:41 dm800 user.info kernel: [4294669.673000] brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480500
Jan 1 01:00:41 dm800 user.info kernel: [4294669.728000] usb usb3: configuration #1 chosen from 1 choice
Jan 1 01:00:41 dm800 user.info kernel: [4294669.728000] hub 3-0:1.0: USB hub found
Jan 1 01:00:41 dm800 user.info kernel: [4294669.729000] hub 3-0:1.0: 2 ports detected
Jan 1 01:00:41 dm800 user.info kernel: [4294669.729000] usb 1-1: new high speed USB device using brcm-ehci and address 2
Jan 1 01:00:41 dm800 user.info kernel: [4294669.830000] Initializing USB Mass Storage driver...
Jan 1 01:00:41 dm800 user.info kernel: [4294669.847000] usb 1-1: configuration #1 chosen from 1 choice
Jan 1 01:00:41 dm800 user.info kernel: [4294669.850000] scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:41 dm800 user.info kernel: [4294669.851000] usbcore: registered new driver usb-storage
Jan 1 01:00:41 dm800 user.info kernel: [4294669.851000] USB Mass Storage support registered.
Jan 1 01:00:41 dm800 user.info kernel: [4294669.851000] usbcore: registered new driver hiddev
Jan 1 01:00:41 dm800 user.info kernel: [4294669.851000] usbcore: registered new driver usbhid
Jan 1 01:00:41 dm800 user.info kernel: [4294669.851000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jan 1 01:00:41 dm800 user.info kernel: [4294669.852000] usbcore: registered new driver usbserial
Jan 1 01:00:41 dm800 user.info kernel: [4294669.852000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Jan 1 01:00:41 dm800 user.info kernel: [4294669.852000] usbcore: registered new driver usbserial_generic
Jan 1 01:00:41 dm800 user.info kernel: [4294669.852000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jan 1 01:00:41 dm800 user.info kernel: [4294669.852000] drivers/usb/serial/usb-serial.c: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
Jan 1 01:00:41 dm800 user.info kernel: [4294669.852000] usbcore: registered new driver belkin
Jan 1 01:00:41 dm800 user.info kernel: [4294669.852000] drivers/usb/serial/belkin_sa.c: USB Belkin Serial converter driver v1.2
Jan 1 01:00:41 dm800 user.info kernel: [4294669.852000] drivers/usb/serial/usb-serial.c: USB Serial support registered for cp2101
Jan 1 01:00:41 dm800 user.info kernel: [4294669.852000] usbcore: registered new driver cp2101
Jan 1 01:00:41 dm800 user.info kernel: [4294669.853000] drivers/usb/serial/cp2101.c: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07
Jan 1 01:00:41 dm800 user.info kernel: [4294669.853000] drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
Jan 1 01:00:41 dm800 user.info kernel: [4294669.853000] usbcore: registered new driver ftdi_sio
Jan 1 01:00:41 dm800 user.info kernel: [4294669.853000] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
Jan 1 01:00:41 dm800 user.info kernel: [4294669.853000] drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
Jan 1 01:00:41 dm800 user.info kernel: [4294669.853000] usbcore: registered new driver pl2303
Jan 1 01:00:41 dm800 user.info kernel: [4294669.853000] drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
Jan 1 01:00:41 dm800 user.info kernel: [4294669.853000] i2c /dev entries driver
Jan 1 01:00:41 dm800 user.info kernel: [4294669.854000] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
Jan 1 01:00:41 dm800 user.info kernel: [4294669.854000] ALSA device list:
Jan 1 01:00:41 dm800 user.info kernel: [4294669.854000] No soundcards found.
Jan 1 01:00:41 dm800 user.info kernel: [4294669.854000] TCP bic registered
Jan 1 01:00:41 dm800 user.info kernel: [4294669.854000] NET: Registered protocol family 1
Jan 1 01:00:41 dm800 user.info kernel: [4294669.855000] NET: Registered protocol family 17
Jan 1 01:00:41 dm800 user.warn kernel: [4294669.958000] Empty flash at 0x0009ba84 ends at 0x0009bc00
Jan 1 01:00:41 dm800 user.warn kernel: [4294670.070000] Empty flash at 0x0013fd80 ends at 0x0013fe00
Jan 1 01:00:41 dm800 user.notice kernel: [4294670.111000] jffs2_scan_eraseblock(): Node at 0x0017adfc {0x1985, 0xe001, 0xe0021985) has invalid CRC 0x00000044 (calculated 0x515918d5)
Jan 1 01:00:41 dm800 user.notice kernel: [4294670.172000] jffs2_scan_dirent_node(): Name CRC failed on node at 0x001cb1d0: Read 0xd19624ac, calculated 0x4c408825
Jan 1 01:00:41 dm800 user.warn kernel: [4294670.172000] Empty flash at 0x001cb204 ends at 0x001cb400
Jan 1 01:00:41 dm800 user.notice kernel: [4294670.185000] jffs2_scan_dirent_node(): Node CRC failed on node at 0x001db9e4: Read 0xffffffff, calculated 0xc79c9237
Jan 1 01:00:41 dm800 user.warn kernel: [4294670.185000] Empty flash at 0x001dba14 ends at 0x001dbc00
Jan 1 01:00:41 dm800 user.notice kernel: [4294670.228000] jffs2_scan_dirent_node(): Name CRC failed on node at 0x0022b9cc: Read 0xc727060b, calculated 0x6ccaf73f
Jan 1 01:00:41 dm800 user.warn kernel: [4294670.228000] Empty flash at 0x0022ba24 ends at 0x0022bc00
Jan 1 01:00:41 dm800 user.notice kernel: [4294670.247000] jffs2_scan_inode_node(): CRC failed on node at 0x0025e5d8: Read 0xffffffff, calculated 0x5f004261
Jan 1 01:00:41 dm800 user.warn kernel: [4294670.247000] Empty flash at 0x0025e6b4 ends at 0x0025e800
Jan 1 01:00:41 dm800 user.warn kernel: [4294670.554000] Empty flash at 0x0048d638 ends at 0x0048d800
Jan 1 01:00:41 dm800 user.warn kernel: [4294670.935000] Empty flash at 0x007630c8 ends at 0x00763200
Jan 1 01:00:41 dm800 user.warn kernel: [4294670.941000] Empty flash at 0x0076ab34 ends at 0x0076ac00
Jan 1 01:00:41 dm800 user.warn kernel: [4294671.064000] Empty flash at 0x008508cc ends at 0x00850a00
Jan 1 01:00:41 dm800 user.warn kernel: [4294671.247000] Empty flash at 0x00977738 ends at 0x00977800
Jan 1 01:00:41 dm800 user.warn kernel: [4294671.711000] Empty flash at 0x00d3a3d0 ends at 0x00d3a400
Jan 1 01:00:41 dm800 user.warn kernel: [4294671.734000] Empty flash at 0x00d7a274 ends at 0x00d7a400
Jan 1 01:00:41 dm800 user.warn kernel: [4294673.380000] Empty flash at 0x0193ba94 ends at 0x0193bc00
Jan 1 01:00:41 dm800 user.notice kernel: [4294673.396000] jffs2_scan_inode_node(): CRC failed on node at 0x0196ebf4: Read 0xffffffff, calculated 0x1490a44b
Jan 1 01:00:41 dm800 user.warn kernel: [4294673.397000] Empty flash at 0x0196ed90 ends at 0x0196ee00
Jan 1 01:00:41 dm800 user.warn kernel: [4294673.996000] Empty flash at 0x01dcf270 ends at 0x01dcf400
Jan 1 01:00:41 dm800 user.warn kernel: [4294674.165000] Empty flash at 0x01f0f404 ends at 0x01f0f600
Jan 1 01:00:41 dm800 user.warn kernel: [4294674.318000] Empty flash at 0x020eeaac ends at 0x020eec00
Jan 1 01:00:41 dm800 user.warn kernel: [4294675.257000] Empty flash at 0x0279720c ends at 0x02797400
Jan 1 01:00:41 dm800 user.notice kernel: [4294675.312000] jffs2_scan_dirent_node(): Name CRC failed on node at 0x027fb1d0: Read 0x2d435dcb, calculated 0x29987bde
Jan 1 01:00:41 dm800 user.warn kernel: [4294675.313000] Empty flash at 0x027fb204 ends at 0x027fb400
Jan 1 01:00:41 dm800 user.warn kernel: [4294675.644000] Empty flash at 0x02a42d74 ends at 0x02a42e00
Jan 1 01:00:41 dm800 user.warn kernel: [4294675.986000] Empty flash at 0x02c2aca0 ends at 0x02c2ae00
Jan 1 01:00:41 dm800 user.warn kernel: [4294676.661000] Empty flash at 0x02ff6c70 ends at 0x02ff6e00
Jan 1 01:00:41 dm800 user.warn kernel: [4294676.760000] Empty flash at 0x0307f408 ends at 0x0307f600
Jan 1 01:00:41 dm800 user.warn kernel: [4294678.502000] Empty flash at 0x03a73a08 ends at 0x03a73c00
Jan 1 01:00:41 dm800 user.warn kernel: [4294678.544000] Empty flash at 0x03aa2968 ends at 0x03aa2a00
Jan 1 01:00:41 dm800 user.debug kernel: [4294678.772000] usb-storage: device found at 2
Jan 1 01:00:41 dm800 user.debug kernel: [4294678.772000] usb-storage: waiting for device to settle before scanning
Jan 1 01:00:41 dm800 user.warn kernel: [4294678.772000] VFS: Mounted root (jffs2 filesystem).
Jan 1 01:00:41 dm800 user.info kernel: [4294678.773000] Freeing unused kernel memory: 132k freed
Jan 1 01:00:41 dm800 user.warn kernel: [4294678.782000] Warning: unable to open an initial console.
Jan 1 01:00:41 dm800 user.warn kernel: [4294683.773000] isa bounce pool size: 16 pages
Jan 1 01:00:41 dm800 user.notice kernel: [4294683.775000] Vendor: USB Model: DISK 2.0 Rev: 0828
Jan 1 01:00:41 dm800 user.notice kernel: [4294683.775000] Type: Direct-Access ANSI SCSI revision: 00
Jan 1 01:00:41 dm800 user.notice kernel: [4294683.779000] SCSI device sda: 7864320 512-byte hdwr sectors (4027 MB)
Jan 1 01:00:41 dm800 user.notice kernel: [4294683.781000] sda: Write Protect is off
Jan 1 01:00:41 dm800 user.debug kernel: [4294683.781000] sda: Mode Sense: 43 00 00 00
Jan 1 01:00:41 dm800 user.err kernel: [4294683.781000] sda: assuming drive cache: write through
Jan 1 01:00:41 dm800 user.notice kernel: [4294683.787000] SCSI device sda: 7864320 512-byte hdwr sectors (4027 MB)
Jan 1 01:00:41 dm800 user.notice kernel: [4294683.789000] sda: Write Protect is off
Jan 1 01:00:41 dm800 user.debug kernel: [4294683.789000] sda: Mode Sense: 43 00 00 00
Jan 1 01:00:41 dm800 user.err kernel: [4294683.789000] sda: assuming drive cache: write through
Jan 1 01:00:41 dm800 user.info kernel: [4294683.790000] sda: sda1
Jan 1 01:00:41 dm800 user.notice kernel: [4294683.792000] sd 1:0:0:0: Attached scsi removable disk sda
Jan 1 01:00:41 dm800 user.notice kernel: [4294683.793000] sd 1:0:0:0: Attached scsi generic sg0 type 0
Jan 1 01:00:41 dm800 user.debug kernel: [4294683.800000] usb-storage: device scan complete
Jan 1 01:00:41 dm800 user.info kernel: [4294686.496000] kjournald starting. Commit interval 5 seconds
Jan 1 01:00:41 dm800 user.warn kernel: [4294686.497000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 01:00:41 dm800 user.info kernel: [4294686.498000] EXT3 FS on sda1, internal journal
Jan 1 01:00:41 dm800 user.info kernel: [4294686.498000] EXT3-fs: recovery complete.
Jan 1 01:00:41 dm800 user.info kernel: [4294686.499000] EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 01:00:41 dm800 user.warn kernel: [4294687.270000] stb_core: module license 'Proprietary' taints kernel.
Jan 1 01:00:41 dm800 user.info kernel: [4294687.329000] input: dreambox remote control (native) as /class/input/input0
Jan 1 01:00:41 dm800 user.info kernel: [4294687.330000] input: dreambox advanced remote control (native) as /class/input/input1
Jan 1 01:00:41 dm800 user.info kernel: [4294687.462000] input: dreambox ir keyboard as /class/input/input2
Jan 1 01:00:41 dm800 user.info kernel: [4294687.463000] input: dreambox ir mouse as /class/input/input3
Jan 1 01:00:41 dm800 user.warn kernel: [4294689.108000] enter base init, xvd 20090807, vdc 20080313, rap 20090430, xpt 20080313
Jan 1 01:00:41 dm800 user.warn kernel: [4294689.108000] kernMemSize : 148 MB
Jan 1 01:00:41 dm800 user.err kernel: [4294689.119000] 21:823014000 SMCA: controller reset timed out
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.374000] register adapter
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.375000] register adapter
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.375000] register adapter
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.376000] register adapter
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.376000] register adapter
Jan 1 01:00:41 dm800 user.info kernel: [4294690.377000] input: dreambox front panel as /class/input/input4
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.397000] HDMI: device attached
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.431000] set sb to 3(2)
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.431000] set fb to 2(-1)
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.431000] set input to 0
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.431000] set fb to 2(-1)
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.433000] bcm_video_analog_port_setup (fmt=6)
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.434000] SET FORMAT: display[1], format=6
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.434000] display 0 uses vbi path 1
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.434000] display 1 uses vbi path 0
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.434000] HDMI: hotplug handler!
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.470000] using 50.00Hz as MonitorRefreshRate
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.470000] SET FORMAT: display[0], format=24
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.470000] HDMI detected
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.470000] HDMI mode
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.470000] use EDID to detect colorspace
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.470000] using colorspace: 1
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.546000] set fb to 2(0)
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.546000] bcm_video_analog_port_setup (fmt=6)
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.546000] SET FORMAT: display[1], format=6
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.552000] disable wss on display 0
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.552000] disable wss on display 1
Jan 1 01:00:41 dm800 user.info kernel: [4294690.552000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.748000] enable mad
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.812000] VIDEO0: set fallback framerate to 60000
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.812000] VIDEO0: set progressive override mode to 1
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.812000] VIDEO0: set streamtype!
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.812000] set MPEG2
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.812000] sw rave disabled!
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.817000] sync is off so we enable it
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.817000] playback!
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.818000] total video delay: 0 (0 ms)
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.825000] VIDEO0: start decode
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.825000] flush video decoder
Jan 1 01:00:41 dm800 user.warn kernel: [4294690.825000] VIDEO0 got pts failed !!!! (ret 0)
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.281000] set ac3 to downmix
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.281000] set aac to downmix
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.331000] VIDEO0: first pts 0x0
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.674000] VIDEO0: stop decode
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.674000] no decoder left in sync handling so disable xpt_sync
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.685000] init ALSA!
Jan 1 01:00:41 dm800 user.info kernel: [4294691.688000] DVB: registering new adapter (BCM7401)
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.809000] autodetecting NIMs...
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.812000] ret: 2, feid: 06
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.812000] Found: Slot A, ID: 06 (by CA)
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.812000] Initializing adapter 0 (Alps BSBE2-DVB-S2)
Jan 1 01:00:41 dm800 user.warn kernel: [4294691.812000] special BSBE2 treatment:
Jan 1 01:00:41 dm800 user.warn kernel: [4294696.285000] DVB: registering adapter 0 frontend 0 (cx24116)...
Jan 1 01:00:41 dm800 user.warn kernel: [4294696.432000] set current avs auto aspect to 16:9
Jan 1 01:00:41 dm800 user.warn kernel: [4294696.432000] disable wss on display 0
Jan 1 01:00:41 dm800 user.warn kernel: [4294696.432000] disable wss on display 1
Jan 1 01:00:41 dm800 user.warn kernel: [4294696.432000] set sb to 3(1)
Jan 1 01:00:41 dm800 user.warn kernel: [4294697.275000] 4024946 ms:
Jan 1 01:00:41 dm800 user.warn kernel: [4294697.341000] 66 ms: 28 Starting /etc/rcS.d/S02sysfs...
Jan 1 01:00:41 dm800 user.warn kernel: [4294697.361000] 20 ms: =s
Jan 1 01:00:41 dm800 user.warn kernel: [4294697.602000] 241 ms: 31 Starting /etc/rcS.d/S03udev...
Jan 1 01:00:41 dm800 user.warn kernel: [4294697.705000] 103 ms: =f
Jan 1 01:00:41 dm800 user.warn kernel: [4294697.725000] 20 ms: 34 Starting /etc/rcS.d/S04bootup...
Jan 1 01:00:41 dm800 user.warn kernel: [4294697.727000] 2 ms: 10
Jan 1 01:00:41 dm800 user.info kernel: [4294698.190000] kjournald starting. Commit interval 5 seconds
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.190000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Jan 1 01:00:41 dm800 user.info kernel: [4294698.193000] EXT3 FS on sda1, internal journal
Jan 1 01:00:41 dm800 user.info kernel: [4294698.194000] EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.205000] 478 ms: 12
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.225000] 20 ms: 14
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.260000] 35 ms: 15
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.335000] 75 ms: 16
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.355000] 20 ms: 17
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.394000] 39 ms: 18
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.409000] set current avs auto aspect to 16:9
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.410000] disable wss on display 0
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.410000] disable wss on display 1
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.410000] set sb to 3(1)
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.413000] 19 ms: 19
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.434000] 21 ms: 20
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.525000] VIDEO0: set blank to 0
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.529000] sync is off so we enable it
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.529000] playback!
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.529000] total video delay: 0 (0 ms)
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.533000] 99 ms: 21
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.534000] 1 ms: 22
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.537000] 3 ms: 23
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.604000] VIDEO0: start decode
Jan 1 01:00:41 dm800 user.warn kernel: [4294698.699000] flush video decoder
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.811000] VIDEO0: first pts 0x0
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.811000] VIDEO0: framerate changed 3
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.811000] VIDEO0: resolution changed (1280 720)
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.811000] VIDEO0: aspect changed 3
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.823000] set current avs auto aspect to 16:9
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.824000] disable wss on display 0
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.824000] disable wss on display 1
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.824000] set current avs auto aspect to 16:9
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.824000] disable wss on display 0
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.824000] disable wss on display 1
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.824000] set sb to 3(1)
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.912000] VIDEO0: set blank to 0
Jan 1 01:00:41 dm800 user.warn kernel: [4294699.974000] enable tsm0
Jan 1 01:00:41 dm800 user.warn kernel: [4294700.912000] VIDEO0: stop decode
Jan 1 01:00:41 dm800 user.warn kernel: [4294700.912000] VIDEO0: set blank to 0
Jan 1 01:00:41 dm800 user.warn kernel: [4294700.912000] no decoder left in sync handling so disable xpt_sync
Jan 1 01:00:41 dm800 user.warn kernel: [4294704.300000] 5763 ms: 24
Jan 1 01:00:41 dm800 user.warn kernel: [4294704.351000] 51 ms: 25
Jan 1 01:00:41 dm800 user.warn kernel: [4294704.373000] 21 ms: =s
Jan 1 01:00:41 dm800 user.warn kernel: [4294704.498000] 125 ms: 37 Starting /etc/rcS.d/S10tpmd...
Jan 1 01:00:41 dm800 user.warn kernel: [4294704.639000] 140 ms: =s
Jan 1 01:00:41 dm800 user.warn kernel: [4294704.675000] 36 ms: 40 Starting /etc/rcS.d/S20modutils.sh...
Jan 1 01:00:41 dm800 user.warn kernel: [4294704.694000] 19 ms: =s
Jan 1 01:00:41 dm800 user.warn kernel: [4294704.854000] 160 ms: 43 Starting /etc/rcS.d/S38devpts.sh...
Jan 1 01:00:41 dm800 user.warn kernel: [4294704.873000] 19 ms: =s
Jan 1 01:00:41 dm800 user.warn kernel: [4294705.559000] 686 ms: 46 Starting /etc/rcS.d/S40networking...

voilou