PDA

Voir la version complète : SR-1000HD (pas premium)



digital001
16/08/2014, 19h14
bonjour et salamou alaikoum.. j ai recu un sr-1000hd .et svp je voudrai savoir s il ya une mise a jour pour la tnt ou une mise a jour pour mettre uncccam.. et quel version .. merci pour une reponse a tout le monde

toonsi
16/08/2014, 21h34
Bonsoir Digital
Voici la derniere MAJ:**Hidden Content: Check the thread to see hidden data.**
Faites f1 000 Pour activer les sharing
Puis pour le cccam: Menu/Expansion/Network Application/Server Setting/Server Type/Cccam
Ensuite compléter les 4 lignes
- IP/URL
- TCP Port
- User Name
- Password
en pressant sur OK sur chaque ligne afin d'acceder au tableau alphanumerique et finissez à chaque fois par OK
Enfin quand vous aurez remplit les 4 lignes sortir et mémoriser.
Cordialement.

toonsi
18/08/2014, 02h25
Bonjour digital, je répond à ton message privé qui devra être poursuivi dans cette discussion pour plus d'éfficacité: "sabah ennour .. merci pour ta reponse .. voila .j ai fais une connerie . j ai mis a jour avec une version .et maintenant le me retrouve bloque avec la led vert et rouge .:au secours: de l aide .merci si tu as un dump et son loader et la marche a suivre ..merci merci merci"

- Le Dump:
**Hidden Content: Check the thread to see hidden data.**
- Le Loader:
**Hidden Content: Check the thread to see hidden data.**
- La Methode:
IMPORTANT, DEMO ETTEINT ELECTRIQUEMENT

pour ce qui est de la méthode de la mise à jour par loader
et celle ci prend du temps

vous cliquer sur le loader en deux fois pour l'ouvrir puis vous cliquez sur update file pour choisir

le fichier de la mise a jour et son emplacement

en le trouvant vous cliquez sur et après sur ouvrir
vous cliquez sur update + sur le bouton MENU
qui est sur la façade du récepteur et allumer le de derriere
et vous allez remarqué que le transfert démarre
sur le loader et sur le récepteur
Vous lachez le bouton menu de la façade à ce moment là
et vous attendez à ce que le tranfert se termine
et le récepteur affiche END
Puis redemarre automatiquement.

digital001
18/08/2014, 21h04
merci a toi pour les fichiers .. j ai essaye plusieur fois la methode .mais rien de rien . toujours ..led rouge et vert .. merci .j ai bien suivi .mais rien . esqu il y a un autre moyen .. merci

toonsi
19/08/2014, 18h22
Bonjour Digital, si tu ne peux pas le faire reparer et que tu n'as plus d'autres choix tu peux essayer un dernier moyen avec les risques que cela comporte: la methode HyperTerminal.
Ce programme est présent dans windows jusqu'à XP, ensuite il faut le telecharger gratuitement sur le net ou bien là: **Hidden Content: Check the thread to see hidden data.**
Suis les 2 methodes suivantes:

Methode A
1_ Open Hbertrnimal program of
2_ filling machine from fallow back Receiver
3_ press at the same time on the three buttons of the keyboard
Ruler & Shift & 2 at the same time with continued pressure and lift
As the picture below
Until a message appears
STB225 v1 nand
http://www5.0zz0.com/2011/12/24/11/835072982.png
When the message appears as image advancing green
We write the following command
run menu
Then we press Inter keyboard

http://www12.0zz0.com/2011/12/24/11/898044890.png

After pressing the Inter from the keyboard
http://www11.0zz0.com/2011/12/24/11/967281870.png

After pressing the Inter message appears above
Please insert order
No. 4, and then writes Inter
http://www4.0zz0.com/2011/12/24/11/676260012.png
After writing No. 4 and the pressure on Inter begin the process of organizing sizes and arrangement of the parts

http://www13.0zz0.com/2011/12/24/11/152493994.png

Now at this stage Put your device version put flashdisk
And put the receiver and then restart the receiver from the back and leave fallow receiver the usual update process will return to work

Methode B
Instructions for the emergency: uboot new flashing alien1

Instructions for the emergency: uboot new flashing


There are increasing reports of users that shooting up the boot loader or corrupt, although this should be impossible due to read-only http://www.sat-universe.com/images/smilies/wink.gif
The box gets stuck in the episode at boot time (display: boot) no longer boots up, no matter if spark or Enigma.

Normally, this is a case of warranty.
You can save postage and time but by you yourself new overrides in case of emergency the submarine.

Attention: only for users with some clue in matter > everyone else please the box send to repair!

Instructions:
What is needed?
Null modem cable
Hyper terminal program (Windows XP: start > Accessories > communications > HyperTerminal)
Note: starting with Windows Vista, HT is no longer part of Windows, but there are freeware.

Emergency-HowTo: override bootloader
==================================

Use only in case of an emergency!

-Switch off box, then connect to PC/laptop via null-modem cable (RS232)
-Start HyperTerminal and create new connection
-> select correct COM interface
-> Bits per second: 115-200
-> Flow control: no

-Then transfer > Send file
-Select correct uboot-xxx.bin
-Log: Ymodem
-Click send!

> now before turning on the box!
-When you turn hold button [OK] to [FORC] appears
-then left arrow [<] press
-RS232 appears on the display

Now is the transmission, which should take about 2 minutes.
Turn off not prematurely or other maneuvers at this stage!

Flash at your own risk!

Thx ans RSP-Team für den uboot-alien und an Dirk Tössfeld für den uboot-pingulux.


Code:
**Hidden Content: Check the thread to see hidden data.**
BON COURAGE!

digital001
20/08/2014, 21h12
ssalam mes amis .je reviens vers vous . je brache hyperterminal . et voile ce qu il me donne . ce n ai vraiment pas comme les fichier que j ai recu ..merci pour une suite.....

Board: STb7109e-ref




U-Boot 1.1.2.GS02 (Dec 14 2009 - 18:37:16) - st2.0-14


DRAM: 128 MB
Flash: 16 MB
In: serial
Out: serial
Err: serial
UUU.## Booting image at a0040000 ...
Image Name: “Linux 2.6
Image Type: SH-4 Linux Kernel Image (gzip compressed)
Data Size: 1935525 Bytes = 1.8 MB
Load Address: 84501000
Entry Point: 84502000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Image Name: 7109 ST40 Linux Ramdisk
Image Type: SH-4 Linux RAMDisk Image (uncompressed)
Data Size: 5723423 Bytes = 5.5 MB
Load Address: 85900000
Entry Point: 85900000
Verifying Checksum ... OK
Loading Ramdisk to 84a8a000, length 0057551f ... OK


Starting kernel root=/dev/ram0 nwhwconf=device:eth0,hwaddr:00:FA:E0:FA:E0:00 stb
7109eth=0,5000,1000 stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 ste101p=device:et
h0,flowctrl:0 ip=192.168.115.242::192.168.115.1:255.255.255.0:ma rco:eth0:off ram
disk_size=20480 rw mem=59m bigphysarea=2000 - 0x0058a000 - 5723423 ...

digital001
25/08/2014, 18h53
ssalam mes amis .je reviens vers vous . je brache hyperterminal . et voile ce qu il me donne . ce n ai vraiment pas comme les fichier que j ai recu ..merci pour une suite.....

Board: STb7109e-ref




U-Boot 1.1.2.GS02 (Dec 14 2009 - 18:37:16) - st2.0-14


DRAM: 128 MB
Flash: 16 MB
In: serial
Out: serial
Err: serial
UUU.## Booting image at a0040000 ...
Image Name: “Linux 2.6
Image Type: SH-4 Linux Kernel Image (gzip compressed)
Data Size: 1935525 Bytes = 1.8 MB
Load Address: 84501000
Entry Point: 84502000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Image Name: 7109 ST40 Linux Ramdisk
Image Type: SH-4 Linux RAMDisk Image (uncompressed)
Data Size: 5723423 Bytes = 5.5 MB
Load Address: 85900000
Entry Point: 85900000
Verifying Checksum ... OK
Loading Ramdisk to 84a8a000, length 0057551f ... OK


Starting kernel root=/dev/ram0 nwhwconf=device:eth0,hwaddr:00:FA:E0:FA:E0:00 stb
7109eth=0,5000,1000 stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 ste101p=device:et
h0,flowctrl:0 ip=192.168.115.242::192.168.115.1:255.255.255.0:ma rco:eth0:off ram
disk_size=20480 rw mem=59m bigphysarea=2000 - 0x0058a000 - 5723423 ...
mon ami toonsi ..je reviens vers toi ..esqu il ya un moyen ou c est foutu ..merci

toonsi
26/08/2014, 00h44
Bonsoir Digital,
reessaies la methode du flashage avec loader du post du 18/08/14 à 3h25 avec le loader et dump que je t'avais indiqué dans ce post mais en veillant au moment de passer le dump: tu cliques sur UPDATE puis tu appuies et maintiens appuyé sur le bouton MENU sur l'avant du demo et tout en maintenant la pression sur le bouton MENU, tu allume electriquement le demo avec l'interrupteur à l'arriere du demo.
Voilà un tuto en image: **Hidden Content: Check the thread to see hidden data.**
Sinon voici 2 autres dump à essayer:
**Hidden Content: Check the thread to see hidden data.**
**Hidden Content: Check the thread to see hidden data.**

taquilla18
19/01/2021, 15h04
Thanks ....

Thanks....... ......